Author Topic: Hickory Shorty  (Read 3392 times)

0 Members and 2 Guests are viewing this topic.

Offline aznboi3644

  • Member
  • Posts: 802
Hickory Shorty
« on: October 16, 2010, 05:24:01 pm »
I'm almost finished tillering a bend in the handle hickory flat bow.  Its my first with hickory.  Currently its around 40lbs at 26".  top limb has 1.5" set after unstringing and the bottom 1".   I still have to take a few scrapes on the top mid limb and final sand.


Which limb should I scrape to even out the set on each limb?  I'll take pictures tonight.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Hickory Shorty
« Reply #1 on: October 16, 2010, 06:11:18 pm »
Make the stiffer limb the bottom limb.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline sailordad

  • Member
  • Posts: 5,045
Re: Hickory Shorty
« Reply #2 on: October 16, 2010, 11:18:30 pm »
personaly  i wouldnt worry about it
sounds like you have the stiffer limb at the bottom already
call it done and shoot it as long as the tillers good
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline aznboi3644

  • Member
  • Posts: 802
Re: Hickory Shorty
« Reply #3 on: October 17, 2010, 12:31:16 am »
Took a few scraps off the stronger limb...set is about even now.  Battery is dead on the camera...Tomorrow I"ll narrow the tips down to near 1/4 inch.

I'm pretty stoked about this bow...actually the heaviest wood bow I've gotten to full draw without major set or breaking.  My first hunting weight bow.  Shoots pretty accurately also.  Just need to start on a set of hunting arras for it.

Offline bubby

  • Member
  • Posts: 11,054
Re: Hickory Shorty
« Reply #4 on: October 17, 2010, 02:44:23 am »
How shot is it, whats the specs, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline aznboi3644

  • Member
  • Posts: 802
Re: Hickory Shorty
« Reply #5 on: October 17, 2010, 10:43:50 pm »
Specs are 57" nock to nock...Pulling 40lbs @ 26".

1.25 inches wide at the middle 2 inch handle.  2" long fades out to 1 5/8" wide...then straight taper to 1/2" nocks....set is just under 2" each limb after unstringing and settles down 1" after resting.

This bow came from a hickory board a member on here named wildman sent me...very gracious of him.  The board started out 58" long 1.75" wide and a little under 0.5" thick.

This is my first bow from hickory...had a maple bow blow up in my face yesterday.

Here are a couple pictures.  Comments welcome...I need feedback on my first hunting weight bow :)

Bow is not finished yet...only finished tillering.


Arrow is 47" in the FD picture



Offline gmc

  • Member
  • Posts: 513
Re: Hickory Shorty
« Reply #6 on: October 18, 2010, 12:41:58 am »
I think you've taken a very difficult design and pulled it off quite well.

Just being super picky since you've ask for a little feedback, the top tip is a little stiff about 3 or 4 inches back but there may be a little natural reflex that I'm seeing. This is giving a little more added pressure on the bottom limb; but you probably already know this and I'm sure it will be fine the way it is. 

That's one hard-hitting design if done properly and I think you've pulled it off.

Nicely done.
Central Kentucky

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: Hickory Shorty
« Reply #7 on: October 18, 2010, 01:23:18 pm »
nice bow !, dang what an arrow

Offline Postman

  • Member
  • Posts: 1,154
Re: Hickory Shorty
« Reply #8 on: October 18, 2010, 02:27:28 pm »
nice job - cool arrow, too.
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline Parnell

  • Member
  • Posts: 5,556
Re: Hickory Shorty
« Reply #9 on: October 18, 2010, 02:59:40 pm »
Looks like a good bow.  Congratulations with it!  Tiller looks pretty good to me, if it's shooting well, I'd enjoy the bow.  Don't see many people making arrows that long but I'm curious about them - seems like a lot of aboriginal people use long arrows like that.  How is it shooting - do you have it fletched?  Doesn't look like it in the picture...
1’—>1’

Offline aznboi3644

  • Member
  • Posts: 802
Re: Hickory Shorty
« Reply #10 on: October 18, 2010, 04:35:59 pm »
The arrow is a 47" straight grained poplar dowel I found at lowes 3/8" thick.

Its fletched flu flu style...I plan on refletching it and put a self made trade point on it and call it a wall hanger

Offline NTD

  • Member
  • Posts: 1,771
Re: Hickory Shorty
« Reply #11 on: October 18, 2010, 09:29:03 pm »
Very nice bow can't wait to see it finished.  Very similar to one of Tim's bows in TBB4.  Hows it shoot? 
Nate Danforth

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Hickory Shorty
« Reply #12 on: October 19, 2010, 10:04:35 am »
Sweet looking bow,tiller looks great,congrats on that one. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline aznboi3644

  • Member
  • Posts: 802
Re: Hickory Shorty
« Reply #13 on: October 21, 2010, 07:46:01 pm »
Took the plunge into needle tips last night...used my trusty fiskars scissors and scraped each tip down to 1/4" without testing the strength...strung her up and pulled to full draw.

IT WORKED!!! I was kinda scared making the tips that small but they are holding just fine...heat treated the bow also last night...added a little too much reflex into one limb though.

Will it hurt the bow to heat correct the over reflexed limb down to 2 inches of reflex?

I plan on backing with hemp thread after re tillering.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Hickory Shorty
« Reply #14 on: October 22, 2010, 07:45:12 am »
I would re tiller first and shoot it a little,some may pull out and then you will be wishing you didn't take it out.  :) Can't wait to see her all finished up.
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good