Author Topic: My first Moley  (Read 7305 times)

0 Members and 2 Guests are viewing this topic.

Offline denny

  • Member
  • Posts: 304
    • my site
My first Moley
« on: September 05, 2010, 04:01:56 pm »
I hope to make more, But not quite so long. This is 66 inches and 50 lbs at 28 inches. It is made of ash With walnut backing and osage handle,wrapped with Bison leather. Shoots very strong and very fast. Denny

[attachment deleted by admin]

Offline walkabout

  • Member
  • Posts: 192
Re: My first Moley
« Reply #1 on: September 05, 2010, 04:13:17 pm »
very cool, congrats on your first one being successful.the first few of any style bow are really just figuring out the little things that will make or break them, then after that its just a matter of adjusting the important dimensions to what you like.

Offline adb

  • Member
  • Posts: 5,339
Re: My first Moley
« Reply #2 on: September 05, 2010, 04:16:27 pm »
Nice tiller... looks proper for a Holmie. Walnut backed ash? Hmmm... I would have done it in exactly the opposite combo. Ash is tension strong, and makes a good backing. Walnut? Don't know. I hope it holds up for you.

Offline denny

  • Member
  • Posts: 304
    • my site
Re: My first Moley
« Reply #3 on: September 05, 2010, 04:20:27 pm »
more pics of my moley

[attachment deleted by admin]

Offline denny

  • Member
  • Posts: 304
    • my site
Re: My first Moley
« Reply #4 on: September 05, 2010, 04:21:54 pm »
Holy crap ,I am seeing double..lol sorry denny

Offline walkabout

  • Member
  • Posts: 192
Re: My first Moley
« Reply #5 on: September 05, 2010, 04:22:12 pm »
plainsawn walnut(i believe black) is actually quite strong in tension. if you get ahold of an 1/8" strip it will bend pretty far before it breaks.

Offline hammertime

  • Member
  • Posts: 763
  • no shoes no shirt, no problems
Re: My first Moley
« Reply #6 on: September 05, 2010, 04:46:13 pm »
Nice lookin bow denny never tried walnut as a backing might open up some possabilities also like the osage in the handle Hammertime

Offline denny

  • Member
  • Posts: 304
    • my site
Re: My first Moley
« Reply #7 on: September 05, 2010, 05:11:43 pm »
Thanks Hammer, here is another pic. Denny

Offline Steve Milbocker

  • Member
  • Posts: 447
Re: My first Moley
« Reply #8 on: September 05, 2010, 08:45:02 pm »
Very nice Denny, I definitely want to give one of them a go soon.
I'm no where near as smart as my phone!

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: My first Moley
« Reply #9 on: September 05, 2010, 08:50:30 pm »
looks good. Is the belly toasted?
Genesis 27: 3

Offline denny

  • Member
  • Posts: 304
    • my site
Re: My first Moley
« Reply #10 on: September 05, 2010, 11:59:47 pm »
Thanks Steve and n2huntn for the words. No the belly is not toasted , the ash is only clear coated. Denny

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: My first Moley
« Reply #11 on: September 06, 2010, 11:47:36 am »
beautiful piece, really like the way the grain shows.
Genesis 27: 3

Offline Steve Milbocker

  • Member
  • Posts: 447
Re: My first Moley
« Reply #12 on: September 06, 2010, 12:02:58 pm »
I've read several times that this design hits hard. Do they have quite a lot of shock with the tips as heavy as they are?
I'm no where near as smart as my phone!

Offline walkabout

  • Member
  • Posts: 192
Re: My first Moley
« Reply #13 on: September 06, 2010, 01:05:14 pm »
actually when compared to a normal bow layout or design the mollegabet has about the same amount of outer limb mass, if not sometimes less. this is due to the principle of wood- ( 2x thickness= 8x strength 2x width= 2x strength) the bowyers bible series actually shows that a bow designed with an inner working limb and outer narrow nonworking limbs(similar to the molle) is one of the most efficient designs, as it allows the wood to do work where needed, while keeping with dimensions that will allow the wood to not take considerable strain. i believe it was the section with the combined ishi/pyramid bow and some of the other mantra bows, not sure which volume.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: My first Moley
« Reply #14 on: September 06, 2010, 01:09:28 pm »
Nice, I like the grain.
I'm working on an Ash flatbow, I'm in two minds how to do the tips 'Meare Heath' style or go narrow and deep for a hint of homie.
Prob' have her finished next week.
Del
Health warning, these posts may contain traces of nut.