Nock overlays

[Steve Milbocker]

I just got my first self bow tillered to draw length under the tutelage of Gary Davis of Rattlestick Bows. Now I need to custom shape my grip and finish the nocks. I'm considering overlaying them with antler or a contrasting wood. Will Tight Bond 3 work for antler as well as wood? 

[Mark Anderson]

TB3 should work but I usually use a gel type super glue or an epoxy for knock overlays.
Be sure to post pictures when you're done!
Mark

[Marc St Louis]

I've had too many overlay failures with super glue that I won't be using it again.  TB3 works quite well

[straightarrow]

I used Gorilla glue on antler nocks and its still holding up after alot of shootin

[Pappy]

TB3 is what I use most of the time.  Congrats on the new bow,pictures please. !!!!!
   Pappy

[Steve Milbocker]

Thank you all. I'm cutting some antler today.

[bigcountry]

I use a stuff called plastic weld epoxy.  Just epoxy.  Reason I use it is it drys to same color as osage when doing osage bows.  I also use TB3 with luck.