« previous next »
Pages: [1] 2

Author Topic: back at it again pyramid bow 64"  (Read 5541 times)

0 Members and 1 Guest are viewing this topic.

kinkfeather

  • Guest
back at it again pyramid bow 64"
« on: July 28, 2010, 11:30:05 am »
kinda like kens bow.my bow will be 64" nock to nock.7"riser 1 1/2" fades 1" wide handle by 4" lenght.limbs 2" wide fade to 1/2" tip.i am shooting for 45/50 lbs@ 27"draw.the whickness on limbs 7/16".all my bows are built with hand tools no power tools at all.slow an easy on this one.i do not want to get all crazy on this one.kink
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: back at it again pyramid bow 64"
« Reply #1 on: July 28, 2010, 02:49:12 pm »
good luck joe keep postin pics
Logged

kinkfeather

  • Guest
Re: back at it again pyramid bow 64"
« Reply #2 on: July 29, 2010, 06:43:16 pm »
2 pics all the work on this bow is by hand no power tools at all.kink
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: back at it again pyramid bow 64"
« Reply #3 on: July 29, 2010, 07:12:16 pm »
I'd get a little more taper on the thickness of those fades, don't want it popping off. Other than that, good start :)
Logged

Offline youngbowyer33

  • Member
  • Posts: 606
Re: back at it again pyramid bow 64"
« Reply #4 on: July 29, 2010, 07:15:27 pm »
what did you use for most of the wood removal? a plane?
Logged
"All we have to decide is what to do with the time that is given to us"

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: back at it again pyramid bow 64"
« Reply #5 on: July 29, 2010, 10:12:49 pm »
i agree with Kegan , and it looks like your well on your way to a fine bow!
Logged

half eye

  • Guest
Re: back at it again pyramid bow 64"
« Reply #6 on: July 29, 2010, 10:46:51 pm »
Looks a damned fine start to this old man too. Be carefull talkin to that "Ken" guy....next thing ya know your going be buildin some of them rocket launchers like he does ;D Addictive aint it?
rich
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: back at it again pyramid bow 64"
« Reply #7 on: July 29, 2010, 11:22:47 pm »
lol , nothin wrong with a telephone pole launcher  >:D, i've been lucky to have good teachers !
Logged

kinkfeather

  • Guest
Re: back at it again pyramid bow 64"
« Reply #8 on: July 30, 2010, 10:41:48 am »
i use a draw knife for most of the wood.wood chisel on handle.i use only hand tools.going 3/8" thickness on limbs if it is not enought lbs i will pike it.the fades on the handle need to be thinner.i will post a pic again when that is done.thanks kink
Logged

Offline Kegan

  • Member
  • Posts: 2,676
Re: back at it again pyramid bow 64"
« Reply #9 on: July 30, 2010, 03:04:09 pm »
If you haven't tried it yet, cutting kerfs with a hand saw and then taking the thickness down with a chisel is about the easiest method for cutting fades I've found, even better than using a saber saw. I cut the kerfs with the hand saw and then knock most of it down with a hatchet these days, but the chisel is still cleaner :)
Logged

kinkfeather

  • Guest
Re: back at it again pyramid bow 64"
« Reply #10 on: July 31, 2010, 01:31:10 pm »
had to pike it not enought lbs 63" from tip to tip.scrape one limb to zero tiller.it is probably the best bow i have made.topped out 46lbs @ 27".i believe this is my hunting bow.yesterday i was 4 1/2 hrs on 1 limb with a draw knife an 1 1/2 hrs on the other.i need to spend my time now on shooting an scouting my hunting grounds.be ready deer hunting slow an easy.this will be a special season for me because the last 4 yrs battleing cancer.not too many hunting seasons left got to be ready.kink
Logged

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: back at it again pyramid bow 64"
« Reply #11 on: July 31, 2010, 02:46:32 pm »
Attaboy, Kink.  Keep at it!

You are really making progress now.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: back at it again pyramid bow 64"
« Reply #12 on: August 01, 2010, 12:00:22 am »
sounds good joe , post us a pic when ya can i would like to see it.
Logged

kinkfeather

  • Guest
Re: back at it again pyramid bow 64"
« Reply #13 on: August 01, 2010, 10:25:59 pm »
finished bow
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: back at it again pyramid bow 64"
« Reply #14 on: August 01, 2010, 10:37:52 pm »
looks good joe . hope you get some meat with that one !
Logged
Pages: [1] 2
« previous next »