« previous next »
Pages: [1]

Author Topic: about short billets  (Read 2314 times)

0 Members and 1 Guest are viewing this topic.

Offline Blacktail

  • Member
  • Posts: 1,432
about short billets
« on: July 07, 2010, 07:39:09 pm »
how short can a billet be for a take down bow or even a splice..i have some billets that are left over from other bows that i have been saving but i think they might be to short for any thing...they 30'' inches.and i even have one that is 27''...SO,how short can a person go..thanks john
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: about short billets
« Reply #1 on: July 07, 2010, 07:41:33 pm »
the takedown sleeves I have used all require 2" for the brass sleeve on each limb which butt together inside the steel handle.  Most splices are 2"to 4" long.  So if you have 30" billets, 2 inches off each billet will leave you with a 56" bow.  :)
« Last Edit: July 08, 2010, 12:52:34 pm by Josh »
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Blacktail

  • Member
  • Posts: 1,432
Re: about short billets
« Reply #2 on: July 07, 2010, 08:56:26 pm »
looks like they might turn into California Indian bow...
Logged

Offline KenH

  • Member
  • Posts: 247
  • The Kilted Cook
    • The Kilted Cook Personal Chef
Re: about short billets
« Reply #3 on: July 07, 2010, 09:32:24 pm »
LOTS of bow possibilities in the 52" to 56" range.   Møllegabets, Pyramids, Half Eye's Ottawa/Seneca/Chippewa NA bows, PNW tribal bows.  You're not gonna get 50#-70#,  29-30" draws though.  With good tillering you can get 27-28" and #40ish draw weights.
Logged
You Kill It - I Cook It!
Ken Hulme,
The Kilted Cook Personal Chef Service

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: about short billets
« Reply #4 on: July 07, 2010, 11:31:55 pm »
With a take down sleeve you could make a 60"t/t bow. With a 3" splice maybe 57" t/t.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Gordon

  • Member
  • Posts: 3,299
Re: about short billets
« Reply #5 on: July 08, 2010, 01:23:39 am »
What kind of wood are they?
Logged
Gordon

Offline Blacktail

  • Member
  • Posts: 1,432
Re: about short billets
« Reply #6 on: July 08, 2010, 02:55:00 pm »
thanks so much for the info guys its helpfull...GORDON-YEW WOOD...PAT,i really didnt know a person could do a 3'' splice..so,that is some thing new to learn...ok.with a 3'' splice and the bow being 57'' ...do you think the splice will hold...i guess it depends on poundage...john
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: about short billets
« Reply #7 on: July 08, 2010, 03:57:45 pm »
you can always reinforce your splice area with an overlapping whole piece of wood on the back and belly the legth of the handle.   Gives the splice a little more support and rounds out the handle better...  Win/Win.   :)
« Last Edit: July 08, 2010, 04:04:00 pm by Josh »
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline TRACY

  • Member
  • Posts: 4,523
Re: about short billets
« Reply #8 on: July 08, 2010, 06:47:51 pm »
Quote from: blacktail on July 08, 2010, 02:55:00 pm
thanks so much for the info guys its helpfull...GORDON-YEW WOOD...PAT,i really didnt know a person could do a 3'' splice..so,that is some thing new to learn...ok.with a 3'' splice and the bow being 57'' ...do you think the splice will hold...i guess it depends on poundage...john

Marc St.Louis had an article in the past year(not sure which issue) and he shares some of his splicing techniques and they were <4".

I've had good luck with 3" myself on 56-60" bows myself using urac for what it's worth.

Tracy
Logged
It is what it is - make the most of it!    PN500956

Offline jkekoni

  • Member
  • Posts: 90
Re: about short billets
« Reply #9 on: July 09, 2010, 11:04:18 pm »
You can splice both billets to a handle piece. This would allow you to add some length and not waste any length on joint. Asian composites are usually done like this.
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: about short billets
« Reply #10 on: July 10, 2010, 10:41:13 am »
John,

Don't discard those billets. You can make a perfectly good 56" bow out of yew, especially if you sinew the back.
Logged
Gordon

Offline Blacktail

  • Member
  • Posts: 1,432
Re: about short billets
« Reply #11 on: July 10, 2010, 04:20:27 pm »
gordon,i wont..i am just trying to figure the best way  too get it done...
Logged
Pages: [1]
« previous next »