Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Tip Overlays
« previous
next »
Print
Pages: [
1
]
Author
Topic: Tip Overlays (Read 2764 times)
0 Members and 1 Guest are viewing this topic.
hillbilly61
Member
Posts: 893
Fly straight and true
Tip Overlays
«
on:
May 30, 2010, 09:19:00 am »
How do you put tip overlays on bamboo? Is a certain kind of glue used? And last. At what point do you add them?
Logged
I will say of the Lord,"He is my refuge and my fortress;
My God, in Him I will trust." Psalm 91:2
Eric Krewson
Member
Posts: 5,432
Re: Tip Overlays
«
Reply #1 on:
May 30, 2010, 10:56:17 am »
Tip overlays look the best if you cut the pocket for the overlay at an angle toward the belly. This way you won't have a big lump of an overlay perched on the back of your bow.
I normally use Urac for overlays but have used superglue with good results as well.
Here is an example of an overlay on bamboo installed the way I described. You can see in the pictue that the overlay is only glued on about 1/4" of bamboo because of the taper, the rest is glued on the osage core.
«
Last Edit: May 30, 2010, 03:23:45 pm by Eric Krewson
»
Logged
Lombard
Guest
Re: Tip Overlays
«
Reply #2 on:
May 30, 2010, 11:44:34 am »
Eric, that is a good example of your excellent craftsmanship. Do you have other photos of the of that fine weapon?
Logged
Eric Krewson
Member
Posts: 5,432
Re: Tip Overlays
«
Reply #3 on:
May 30, 2010, 12:14:40 pm »
No good pictures of the bow. I had a guy snap it up at the Hill shoot 5 minutes after I parked my camper.
Here is another picture of glueing an overlay on at an angle. This is osage burl in the raw.
Logged
hillbilly61
Member
Posts: 893
Fly straight and true
Re: Tip Overlays
«
Reply #4 on:
May 30, 2010, 12:16:02 pm »
Thanks Eric. Do you concave the overlay to fit the roundness of the boo?
Logged
I will say of the Lord,"He is my refuge and my fortress;
My God, in Him I will trust." Psalm 91:2
El Destructo
Member
Posts: 8,078
Longhaired Crippled Hippie Biker And Proud Of It!!
Re: Tip Overlays
«
Reply #5 on:
May 30, 2010, 12:19:36 pm »
I use Super Glue....and cut them about the same.... and Hillbilly...you just file it or belt sand the Boo flat on an Angle...and glue the Overlay on...you don't cope it out to fit the Boo....
[attachment deleted by admin]
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome
Badger
Member
Posts: 8,124
Re: Tip Overlays
«
Reply #6 on:
May 30, 2010, 12:48:03 pm »
Hillbilly, read his first post, the overlay is just barely touching the boo, most of it was ground away.
Logged
Eric Krewson
Member
Posts: 5,432
Re: Tip Overlays
«
Reply #7 on:
May 30, 2010, 01:31:12 pm »
One more thing, I sometimes add the overlay after floor tillering so I may have a slightly rounded belly on a limb, real hard to clamp to. I have found a Popsicle stick will conform to the rounded belly and hold the clamps just fine.
Logged
hillbilly61
Member
Posts: 893
Fly straight and true
Re: Tip Overlays
«
Reply #8 on:
May 30, 2010, 02:28:00 pm »
Thanks guys. That helps alot
Logged
I will say of the Lord,"He is my refuge and my fortress;
My God, in Him I will trust." Psalm 91:2
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Tip Overlays