Author Topic: quick drying  (Read 2062 times)

0 Members and 1 Guest are viewing this topic.

Offline alex b

  • Member
  • Posts: 21
quick drying
« on: April 13, 2010, 09:44:06 pm »
hi i recently cut a hickory tree and am very anxious to make a bow. any way to primitively dry wood fast?
i know about the hot boxs and such but i only work with hand tools and no electricity!

thanks

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: quick drying
« Reply #1 on: April 13, 2010, 10:53:28 pm »
I would rough it out to floor tiller dimensions then put it somewhere dry and warm (Maybey inside a primitive car with the windows closed ;D).  You might want to strap it to something straight to keep it from twisting.
Traverse City, MI

Offline Jmilbrandt

  • Member
  • Posts: 363
Re: quick drying
« Reply #2 on: April 13, 2010, 11:38:52 pm »
Exactly. ;) If you do that it can dry in as quick as a week.
« Last Edit: April 13, 2010, 11:50:07 pm by Jmilbrandt »
SW Utah

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: quick drying
« Reply #3 on: April 13, 2010, 11:52:19 pm »
What Rick said. Near a primitive heating/air conditioning register works well, too.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: quick drying
« Reply #4 on: April 14, 2010, 12:24:13 am »
Rough it out and you can actually begin to floor tiller. Get the limbs moving a few inches. Leave h nocks an inch wide and the handle full width for now. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: quick drying
« Reply #5 on: April 14, 2010, 08:10:40 am »
What Jawges and Hillbilly said is what I use to do all the time when I was in a hurry,you can dry it out in a month or so. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Postman

  • Member
  • Posts: 1,154
Re: quick drying
« Reply #6 on: April 14, 2010, 10:41:37 am »
Make sure you plug the foot holes in the primitive car so it really heats up
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Cacatch

  • Guest
Re: quick drying
« Reply #7 on: April 14, 2010, 12:53:49 pm »
Just be careful. I have seen that hickory loves to twist and check if you try to dry it too fast. Definately do what has been said which is get it roughed out to tillering stage. Then, I'd rub it down with lard and put it someplace warm. This will let it dry but not so fast that it starts twisting and checking. After a few days, you can take a dry rag and rub the lard off, and put it back in the warm place with no lard for another couple weeks or so.

Offline Kegan

  • Member
  • Posts: 2,676
Re: quick drying
« Reply #8 on: April 14, 2010, 09:09:38 pm »
I'm doing the same thing, only in bulk (many bows). I rough them out as close as I can get it and cook them as much as I can. I've had some twisting and checking, but nothing so bad that I couldn't still make a good, strong (65+#) bow out of them. I think slowly working them down more and more as you quick dry it will get you a bow in about a month or two.