Author Topic: questions about pine tar finish  (Read 4380 times)

0 Members and 1 Guest are viewing this topic.

Offline tronman

  • Member
  • Posts: 48
questions about pine tar finish
« on: March 21, 2010, 01:48:39 pm »
Has anyone ever tried a couple applications of 50/50 mixture of pine tar and turpentine and when dry then top it with wax as a finish for their bows?
« Last Edit: March 21, 2010, 01:56:40 pm by tronman »

Offline donnieonetrack

  • Member
  • Posts: 83
Re: questions about pine tar finish
« Reply #1 on: March 21, 2010, 03:11:00 pm »
I have tried dried pine tar and alcohol with good results.

Don
Donnie Wilkerson
Gainesville, Florida

Offline adb

  • Member
  • Posts: 5,339
Re: questions about pine tar finish
« Reply #2 on: March 21, 2010, 10:32:52 pm »
We used to use that stuff on old wooden cross country skis! All I remember is it's sticky, and stinks! ;D

Offline riarcher

  • Member
  • Posts: 180
Re: questions about pine tar finish
« Reply #3 on: March 22, 2010, 11:59:39 am »
Pine Tar, Turps, and Linseed with a bit of Jap Drier was an old standard deck coating in the old days.
I used it on a couple of the planked skiffs I made and the stuff is outstanding to look at when it got a "patina" going. Was very water resistant,,, BUT, took forever to dry.
Taking forever to dry was a good thing on a ship's deck. Possibly the original "Non-Slip Deck Paint" of sorts. When it did dry, and things got slippery it was time for another coat.
If the linseed was left out I don't know how that would effect drying. I bet it would look good, but the sticky?
Hmmm, interesting idea though.
From the Stripercoast of Rhode Island

Offline tronman

  • Member
  • Posts: 48
Re: questions about pine tar finish
« Reply #4 on: April 06, 2010, 11:23:00 pm »
Well I tried the pine tar finish. I worked great and finished it off with Tom's 1/3 wax which is a mixture of turpentine, bees wax, and BLO. It does have a distinct aroma but the finish looks nice. It was very effective at bringing out and highlighting the curl in the maple I used.  Sorry for the picture I do not have a digital camera and took this with my cell phone. I will borrow a real digital camera and post better pictures soon.

[attachment deleted by admin]

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: questions about pine tar finish
« Reply #5 on: April 07, 2010, 12:03:57 pm »
I have used pine pitch/alcohol finish on arrows but not bows. If you start out with hard, brittle pine pitch and desolve it in alcohol it will dry hard(not tacky or sticky) when the alcohol evaporates.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: questions about pine tar finish
« Reply #6 on: April 07, 2010, 06:20:09 pm »
The pine tar that I have used did not dry completely even after a month or so.  It smelled a little like pine...but it wasn't pleasant.  I've heard that there are various grades of pine tar and that the aromatic type is more expensive.

As a finish, I like Riarcher's formula.  The Jap Dryer seems to be a key ingredient that will make all the difference.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr