Author Topic: Tiller check please  (Read 1625 times)

0 Members and 1 Guest are viewing this topic.

Offline Hrothgar

  • Member
  • Posts: 1,477
Tiller check please
« on: February 20, 2010, 04:55:34 pm »
I need a second opinion please. The bow is pulling 48 pounds at 22 inches and I'm shooting for 50 pounds at 27 inches. Bow length is 66 inches, bamboo backed hickory.
Thanks,
Eric

[attachment deleted by admin]
" To be, or not to be"...decisions, decisions, decisions.

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: Tiller check please
« Reply #1 on: February 20, 2010, 05:09:47 pm »
loose the long string and brace it. looks good but you'll know more with the short string
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Tiller check please
« Reply #2 on: February 20, 2010, 05:57:16 pm »
I agree with Jamie. Time for a low brace, about 4". That will give you a truer look at the bend. Take it easy bracing the bow as not to over strain either limb.
  On the long string it looks pretty good but maybe bending more near the fades.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

half eye

  • Guest
Re: Tiller check please
« Reply #3 on: February 20, 2010, 06:07:58 pm »
same as Jamie & Pat.....it looks like most of the bend so far is near the fades / mid limb out looks stiff....just the old guys opinion and everybody knows I only got one eye  ;D
half eye

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Tiller check please
« Reply #4 on: February 20, 2010, 06:15:37 pm »
Thanks for the input. I'm putting the short string on now.
" To be, or not to be"...decisions, decisions, decisions.

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Tiller check please
« Reply #5 on: February 21, 2010, 04:59:12 am »
...
  On the long string it looks pretty good but maybe bending more near the fades.

Pat, just to make sure, do you mean to say right now it's bending more near the fades, or do you mean to say it should bend more near the fades??
Frank from Germany...