Author Topic: New Molle with twist?  (Read 2531 times)

0 Members and 1 Guest are viewing this topic.

Offline Frode

  • Member
  • Posts: 400
New Molle with twist?
« on: February 19, 2010, 10:54:44 pm »
Hi all,
Here is a new one I'm finishing up on, and I have a question about twist.  This one seems to have just a bit of twist at brace, but I don't feel it twisting further at full draw, and I don't think I see it in the full draw pic, but...
The two tree pics are flipped, I was having trouble telling the difference.
What do you think, worry about the twist or no?  :-\
Thanks,
Frode

[attachment deleted by admin]
If it doesn't rap the lintel, it might not be a longbow.

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: New Molle with twist?
« Reply #1 on: February 19, 2010, 10:57:44 pm »
                                                    Some times Boards just twist like that.... ???
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline sailordad

  • Member
  • Posts: 5,045
Re: New Molle with twist?
« Reply #2 on: February 19, 2010, 11:17:42 pm »
i made a board bow that one limb twisted on it at brace
i left it s it was,it shot good and didnt seem to have any ill effects
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: New Molle with twist?
« Reply #3 on: February 19, 2010, 11:23:14 pm »
Is the twist natural? Then usually unless really excessive I don't worry about it? Did I cause the twist by uneven wood removal? Then I fix it. It twists towards the weak side do I remove wood from the other side. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: New Molle with twist?
« Reply #4 on: February 20, 2010, 01:19:24 am »
If it were mine, I wouldn't worry about that little bit of twist, if you do, Jawge's advice is the way to fix it... By the way nice bow man, tiller looks great to me.   :)
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: New Molle with twist?
« Reply #5 on: February 20, 2010, 08:36:45 am »
That is a great looking bow. Well done. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

half eye

  • Guest
Re: New Molle with twist?
« Reply #6 on: February 20, 2010, 09:53:29 am »
Hey Frode,
        You got thing braced up and bending really good. It looked to me like the lower limb in the full draw pic is the one that has a little twist. If you put it on your tree and look down the working limbs "end-wise" you'll be able to see it easily. Any way you can fix that with a little "light" scraping on the strong side of the offending limb.......having said that I have had a few that were left "as-is" and they are shooting just fine to this day.
        It looks like the tiller is about perfect for a Mollegabet, so if it dont bother you....I'd shoot the living "you know what" out of it. Thats as nice a Molle as your going to see.
half eye

Offline Frode

  • Member
  • Posts: 400
Re: New Molle with twist?
« Reply #7 on: February 20, 2010, 12:29:37 pm »
Thanks guys!  I've still got a lot of finish work to do on this one, including tweaking the twist, but Missus Frode says she doesn't see it getting any worse as it's drawn, so I probably wont risk lowering the weight by fiddling with it too much.  I forgot to mention that the working limbs are only 1 1/2" wide, maybe that contributed to the twist?
Thanks,
Frode
If it doesn't rap the lintel, it might not be a longbow.