« previous next »
Pages: [1]

Author Topic: is this a BOOM waiting to happen?  (Read 2998 times)

0 Members and 1 Guest are viewing this topic.

Innocente

  • Guest
is this a BOOM waiting to happen?
« on: December 07, 2009, 12:48:49 am »
red oak, 72" NTN, 50# at 29", linen backed with TB II.
have a look at the wood pics, i sawed this bow outta a 4" wide plank, i could have sworn i had flawless lines before i started.  i got it to weight, took it out to shoot it and noticed a thousand run offs on this one side.  all the other edges have straight grain and seem to have no run offs.

is this bow planning on detonating at full draw and taking out one of my eyes?

george always says someting like max of 2 or 3 run offs in an oak board build...it looks to me like i'm way way past his cutoff.

performance:  it shoots good, just a little slow. i miss having the arrow shelf cut out SO MUCH.  need to make a floppy leather rest, i think.  and put something on the front to round the grip.

[attachment deleted by admin]
Logged

Offline FlintWalker

  • Member
  • Posts: 2,577
Re: is this a BOOM waiting to happen?
« Reply #1 on: December 07, 2009, 01:01:09 am »
I don't think that's run off.  It looks like the "rays" in the wood.
Logged
Be thankfull for all you have, because no matter how bad you think it is...it can always be worse.

Offline boo

  • Member
  • Posts: 343
Re: is this a BOOM waiting to happen?
« Reply #2 on: December 07, 2009, 01:07:25 am »
Looks like straight grain to me also. Nice bow, dont worry about speed, its shot placement that counts.
Logged
Boo

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: is this a BOOM waiting to happen?
« Reply #3 on: December 07, 2009, 01:23:28 am »
I am with Shannon...I have seen this countless times with the Paddle Bows I make....it looks like Rays to me also....Shoot it and enjoy it....JMO
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline Tom Leemans

  • Member
  • Posts: 524
Re: is this a BOOM waiting to happen?
« Reply #4 on: December 07, 2009, 11:37:31 am »
If you don't focus on those "run-offs" and just look at the whole limb at once, you'll see the real grain lines. It looks fine.
Logged

Innocente

  • Guest
Re: is this a BOOM waiting to happen?
« Reply #5 on: December 07, 2009, 12:04:08 pm »
appreciate the input gentlemen.  i've been shooting it with safety glasses on in fear of an eyepatch inducing injury, but i feel reassured now. 
Logged

Offline PeteC

  • Member
  • Posts: 2,014
Re: is this a BOOM waiting to happen?
« Reply #6 on: December 07, 2009, 04:33:25 pm »
Looks like you did a good job to me too.Nice bow. God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: is this a BOOM waiting to happen?
« Reply #7 on: December 07, 2009, 05:22:12 pm »
         I  agree, all oaks have those lines that show when it is polished up, it isnt the grain lines, they look straight
Logged
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: is this a BOOM waiting to happen?
« Reply #8 on: December 07, 2009, 07:07:40 pm »
ditto all the above...rays.  I have made a dozen red oak bows with real run offs and haven't had them break (knock on wood).  That looks good.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline venisonburger

  • Member
  • Posts: 1,042
Re: is this a BOOM waiting to happen?
« Reply #9 on: December 07, 2009, 07:11:04 pm »
Tiller looks good, I agree with the other comments regarding runoff.
VB
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: is this a BOOM waiting to happen?
« Reply #10 on: December 07, 2009, 11:13:32 pm »
Looks safe to me.
Logged
Gordon

Offline Tom Leemans

  • Member
  • Posts: 524
Re: is this a BOOM waiting to happen?
« Reply #11 on: December 08, 2009, 02:19:34 pm »
Just wondering. What did you glue the handle on with? I'm asking because the pic looks like most if not all of the dip is in the handle piece. Hard to tell but did you work some of the dip into the board as well? That would be the one area I'd be concerned about. Tiller looks good though!
Logged

radius

  • Guest
Re: is this a BOOM waiting to happen?
« Reply #12 on: December 08, 2009, 03:29:52 pm »
those pith rays just add beauty...that's nice looking wood, my friend
Logged

Innocente

  • Guest
Re: is this a BOOM waiting to happen?
« Reply #13 on: December 09, 2009, 02:44:49 am »
handle glued on with TB II.  that fade in the handle is just barely worked into the limb, you are correct. i know you are supposed to continue that angle from the handle down into the limb wood, but i'm finding that difficult to pull off.  just got me a bench sander, might make that maneuver a little easier.
Logged
Pages: [1]
« previous next »