« previous next »
Pages: [1]

Author Topic: Looking for a good matte oil based finish  (Read 2957 times)

0 Members and 1 Guest are viewing this topic.

Offline Red Dwarf

  • Member
  • Posts: 121
Looking for a good matte oil based finish
« on: September 11, 2009, 04:46:13 pm »
Have any of you guys found a matte oil based finish that does a reasonable job of keeping out moisture?
I have tried Tung oil (too much shine) and am not overly impressed; could be that I just didn't apply enough coats though.

Red Dwarf
Logged

radius

  • Guest
Re: Looking for a good matte oil based finish
« Reply #1 on: September 11, 2009, 04:57:36 pm »
i love tung oil, penetrates and protects, looks great...i wet sand it in going all the way up to 600 grit and the result is fkn awesome. 

If you don't like the shine, use some tru-oil and just buff it down after a few coats
Logged

Offline artcher1

  • Member
  • Posts: 1,114
Re: Looking for a good matte oil based finish
« Reply #2 on: September 11, 2009, 05:00:48 pm »
Any gloss shine can be dulled with a good steel wool buffing. I do mine with #oooo steel wool dipped in paste wax. ART
Logged

Offline woodstick

  • Member
  • Posts: 899
Re: Looking for a good matte oil based finish
« Reply #3 on: September 11, 2009, 05:14:38 pm »
i use tru oil then if i want to dull it like they said oooo steel wool works great. dont really like tung oil but i only used it once.
Logged
a drawn bow is a stick 9/10 broken

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Looking for a good matte oil based finish
« Reply #4 on: September 11, 2009, 05:50:56 pm »
A quick spray of satin poly over your shiny finish will give you a nice matte finish.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Looking for a good matte oil based finish
« Reply #5 on: September 11, 2009, 08:12:06 pm »
I'm not sure how good it would do in heavy humidity situations, but Danish oil has virtually no sheen.
Logged
Traverse City, MI

Offline Dano

  • Member
  • Posts: 1,349
Re: Looking for a good matte oil based finish
« Reply #6 on: September 11, 2009, 09:07:24 pm »
Tung oil is great for furniture in doors, ::) but is not water resistant. It don't get any easier than Tru Oil with a shot of satin poly of spar eurathane to kill the gloss.

I have to add this, I just did some research on Tung Oil, Pure Tung oil is water resistant, I've always thought it wasn't sorry ::)
« Last Edit: September 11, 2009, 09:24:57 pm by Dano »
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada
Pages: [1]
« previous next »