« previous next »
Pages: [1]

Author Topic: 2 fletch ?  (Read 2125 times)

0 Members and 1 Guest are viewing this topic.

Offline knap_123

  • Member
  • Posts: 572
2 fletch ?
« on: August 16, 2009, 12:44:27 am »
what length do you ude for 2 fletch and why?  i want to get as short as possible  but does length make a difference?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: 2 fletch ?
« Reply #1 on: August 16, 2009, 01:28:47 am »
Ideally you want as little feather surface as possible and still get good steerage for your arrows. This is for any fletching.     I use 5" to 6" of feather for each side of a 2 fletch. I also cut the feather width down so I have a smaller profile. You will have to do a little experimenting to see what works best for your style of shooting.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: 2 fletch ?
« Reply #2 on: August 17, 2009, 12:07:39 pm »
I make mine about the same size as Pat said-usually about 5 1/2" long and trimmed down fairly low.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.
Pages: [1]
« previous next »