« previous next »
Pages: [1] 2

Author Topic: i'd like some info on horse bows  (Read 5314 times)

0 Members and 1 Guest are viewing this topic.

natty

  • Guest
i'd like some info on horse bows
« on: July 28, 2009, 10:19:24 pm »
was looking at making one. i'v reseached it and comprehend the basic facts but would like some fine tuning and pics if possible ;Dthanks
Logged

Offline kayakfisher

  • Member
  • Posts: 638
Re: i'd like some info on horse bows
« Reply #1 on: July 28, 2009, 10:42:22 pm »
This is an Osage rawhide ,backed plains style bow. It is 54 inches ntn draws a weight of 45# 27 inches
       Dennis

[attachment deleted by admin]
Logged
The river of life twist and bends, you never know whats around the next bend till your there

Springfield Mo home of  Kids,Tomato's and Tornado's

Offline shikari

  • Member
  • Posts: 167
Re: i'd like some info on horse bows
« Reply #2 on: July 29, 2009, 11:35:25 am »
What type are you planning to make,Asian or american style?
Logged

natty

  • Guest
Re: i'd like some info on horse bows
« Reply #3 on: July 29, 2009, 11:54:33 am »
i was going to try a mongolian type where you glue the ears on .
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: i'd like some info on horse bows
« Reply #4 on: July 29, 2009, 12:26:41 pm »
Lots of info about that style of bow over there at

atarn.org
Logged
Frank from Germany...

Offline shikari

  • Member
  • Posts: 167
Re: i'd like some info on horse bows
« Reply #5 on: July 29, 2009, 02:05:15 pm »
what type of horn do you have available and what length?The ATARN is a wealth of info.The mongol bows require larger horn than the turkish,indian or korean sizes and they usually use ibex horn but anything like water bufallow or gemsbock have been used.the core is usually tartarian maple or birch but hard maple can be used.
Logged

natty

  • Guest
Re: i'd like some info on horse bows
« Reply #6 on: July 31, 2009, 02:23:36 pm »
i was going to make one out of just wood and see how it works out. then try one out of horn,as this would be my first go at it thank yall for the input
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: i'd like some info on horse bows
« Reply #7 on: July 31, 2009, 02:44:57 pm »
James Parker (robustus) makes them....he's on this Site...he could probably hook you up too....
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline TBod

  • Member
  • Posts: 275
Re: i'd like some info on horse bows
« Reply #8 on: July 31, 2009, 02:47:28 pm »
Here's a pretty cool site. I think there's two Horse bows in there.

http://www.bahnhofbredband.se/~wb304054/index.html
Logged

Offline shikari

  • Member
  • Posts: 167
Re: i'd like some info on horse bows
« Reply #9 on: July 31, 2009, 03:12:28 pm »
the chinese used to make composite bows for the general army that had a belly of tempered bamboo,I had started one myself as an experiment but the bamboo I was using for the core cracked so I am going to try red elm now or just stick with good old hard maple if that fails,I would recomend you use mulberry for the sahiyas/ears.
Logged

natty

  • Guest
Re: i'd like some info on horse bows
« Reply #10 on: August 01, 2009, 08:43:00 pm »
i was thinking; would taking fresh bone pounding it into small strands letting it dry then gluing it to the belly like sinew,would it behave like horn ;)just a crazy thought.thanks for the links maybe some more  ;D
Logged

Offline shikari

  • Member
  • Posts: 167
Re: i'd like some info on horse bows
« Reply #11 on: August 01, 2009, 08:48:54 pm »
what are you smoking?lmao
Logged

Offline FVR

  • Member
  • Posts: 64
    • http://www.angelfire.com/ga/alionatemysister/
Re: i'd like some info on horse bows
« Reply #12 on: August 01, 2009, 10:55:34 pm »
Bone is bone and not very flexible.  I tried to make a cow rib bow once, backed with sinew and it failed.  That bone just would not bend.  Now, there have been bone bows made and I read about them and used them for inspiration.  Only to fail.

If I could find some bison rib bones, yeh, I try it again.  This time maybe use a very thin osage core, bone on the belly and two or three layers of sinew on the back.  Then do a sinew wrap.

It should work, if I can pull it back.
Logged
Can't cheat the mountain, pilgrim.
Mountain got it....

Offline loefflerchuck

  • Member
  • Posts: 1,129
    • www.heartwoodbows.com
Re: i'd like some info on horse bows
« Reply #13 on: August 02, 2009, 02:33:02 am »
Wow! Thanks medicinewheel for the atarn.org site. There is an amazing amount of info on it. I started on 2 composite water buffalo horn bows last year. That site kind of gave me a kick in the pants to continue.
Logged

natty

  • Guest
Re: i'd like some info on horse bows
« Reply #14 on: August 02, 2009, 11:45:00 am »
i ifyou shreded the bone to 1/8 strands it would be flexible but still have high compression.would cedar make good sahiyas/ears.         
maybe i think to much  ;D
Logged
Pages: [1] 2
« previous next »