Author Topic: pics of my blow up  (Read 6078 times)

0 Members and 1 Guest are viewing this topic.

bearbowman

  • Guest
pics of my blow up
« on: March 12, 2009, 02:08:46 pm »
well here you go guys, these are the pictures you wanted to see. i hope someone can tell me what might have happened.

[attachment deleted by admin]

Offline DanaM

  • Member
  • Posts: 9,211
Re: pics of my blow up
« Reply #1 on: March 12, 2009, 02:28:32 pm »
Well I guess what happened is it broke ;) :D

Looks like a tension failure due to bad grain in the board, back the next one with linen or silk.
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Kitsu

  • Member
  • Posts: 198
  • Räven bakom masken
Re: pics of my blow up
« Reply #2 on: March 12, 2009, 02:54:12 pm »
yea, looks like the grain ran off the side and it came off clean...

next time check your boards grain and try not to get anything like that again :P
"If you open your mind for me
You won't rely on open eyes to see
The walls you build within come tumbling down
And a new world will begin" ----- Queensryche, "Silent Lucidity

R.H , Southeastern PA/Western PA.

bearbowman

  • Guest
Re: pics of my blow up
« Reply #3 on: March 12, 2009, 03:29:04 pm »
I bought it from a supplier. I don't want to mention who it is because they are very reputable.

CutNShoot

  • Guest
Re: pics of my blow up
« Reply #4 on: March 12, 2009, 04:52:46 pm »
Wondering what the belly side looked like.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: pics of my blow up
« Reply #5 on: March 12, 2009, 05:28:09 pm »
That's some poor grain on that board. You need straight grained boards. Info on my site. Jawge
http://georgeandjoni.home.comcast.net/~georgeandjoni/
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: pics of my blow up
« Reply #6 on: March 12, 2009, 05:47:28 pm »
It is a tension failure but it doesn't look like it is because the grain was bad, even though the grain is bad. It broke straight across and that tells me it was a faulty stave, probably not seasoned correctly.
   I would contact the dealer and send him pics and see what he says.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

bearbowman

  • Guest
Re: pics of my blow up
« Reply #7 on: March 12, 2009, 05:58:06 pm »
The dealer states that as soon as a tool touches it the warranty is gone. I will still try to contact them but thier warranty is pretty blunt.

thanks, guys

Offline redwasp

  • Member
  • Posts: 222
Re: pics of my blow up
« Reply #8 on: March 12, 2009, 08:14:47 pm »
I for one would like to know the name of company who sold it to you. please send me a PM although I usually pick up my staves from the side of the road that i drive on everyday (when they trim for powerlines) but I still buy things from venders over the internet and do not want to support the Co. that sells that as a workable stave. thanks
If one man can do it, another man can do it. Richard......Northeastern PA.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: pics of my blow up
« Reply #9 on: March 12, 2009, 11:38:21 pm »
I wouldn't buy from a company with that definite of a rule. They could sell you crap and blame you for the screw-up.  You would do better going to Lowe's or Home Depot.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: pics of my blow up
« Reply #10 on: March 13, 2009, 06:21:23 am »
Al tho the grain don't look that good I think it was to dry or dry rot,the way it broke straight across.
I have run into that a lot and now if I have any question on a stave I take a small sliver off of it and do a bend test ,if it breaks like pop corn across the back I make fire wood out of it. Had some
hickory and ash act the same way.I figured it was the place I had seasoned it,not out in the weather
but under an open shed and most white wood will dry rot very quick.Sorry about your luck but it happens. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline TRACY

  • Member
  • Posts: 4,523
Re: pics of my blow up
« Reply #11 on: March 13, 2009, 11:15:48 am »
Yeah, I would have to agree with the rest, not the best grain. I had an osage bow do this a couple of months of go that the grain was not the issue but it had a pocket of dry rot inside the limb and blew with the same results after a few hundred shots. If memory is right, didn't you re-tiller that limb after shooting it in for a little while? Dust yourself off and get going on another :)
It is what it is - make the most of it!    PN500956

bearbowman

  • Guest
Re: pics of my blow up
« Reply #12 on: March 13, 2009, 01:17:15 pm »
yeah I did do a little scraping on that limb. Not much.

Offline TRACY

  • Member
  • Posts: 4,523
Re: pics of my blow up
« Reply #13 on: March 13, 2009, 03:55:40 pm »
I still think the grain is the main issue. Was it recommended by the seller to back it with anything? I sure wouldn't let this stop you from moving forward and building a better bow. Good luck!
It is what it is - make the most of it!    PN500956

Offline african man

  • Member
  • Posts: 90
Re: pics of my blow up
« Reply #14 on: March 13, 2009, 05:07:46 pm »
don't feel bad  :-[
here's two of four bows that went bang one after the other due to a bad batch of hickory  :'(
and one I might just save..... ???


pulling the backing off two ELB's and replacing with boo flo
we all die but we all don't live