Author Topic: Rawhide finish  (Read 4517 times)

0 Members and 1 Guest are viewing this topic.

Offline Dave 55

  • Member
  • Posts: 243
Rawhide finish
« on: February 18, 2009, 09:21:13 am »
I was wondering if spar urethane would be a good finish for rawhide ,any suggestions would be appreciated,thanks Dave.
Now is the good old days

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: Rawhide finish
« Reply #1 on: February 18, 2009, 09:30:18 am »
I don't see why not....I use mostly minwax polyurethane, but spar should work as well.
Its November, I'm gone hunt'in.......
Osage is still better.....

Offline knap_123

  • Member
  • Posts: 572
Re: Rawhide finish
« Reply #2 on: February 18, 2009, 09:51:08 am »
ihave just sinewed a bow, shouald i add tru oil then polyuratane as a sealer?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Rawhide finish
« Reply #3 on: February 18, 2009, 10:29:34 am »
I have used TBIII over sinew, rawhide and snake skins to help prevent moisture problems with these hygroscopic materials. I have also just used TruOil or a combo of both for this.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Rawhide finish
« Reply #4 on: February 18, 2009, 10:39:32 am »
I do about the same as Pat. 4 or5 coats ofTru oil then a last coat of  satin Polly if I want to dull the finish.Never tried the tb3 but I may the next one,sounds good to me. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Lost Arra

  • Member
  • Posts: 121
Re: Rawhide finish
« Reply #5 on: February 18, 2009, 11:03:13 am »
Dave: I like wiped on finishes so my first two coats are Helmsman Spar Urethane wiped on, not sprayed. I use a 400-600 sandpaper between coats. I then finish with multiple coats of Wipe on poly which leaves a smoother finish and requires minimal or no sanding between coats.

Offline Dave 55

  • Member
  • Posts: 243
Re: Rawhide finish
« Reply #6 on: February 18, 2009, 01:05:49 pm »
Thanks for the information guys it is appreciated,Dave
Now is the good old days

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Rawhide finish
« Reply #7 on: February 18, 2009, 05:37:48 pm »
I've only did one rawhide backing.  But I dyed it with Feibings leather dye then finished it with tru-oil applied with my finger.
Traverse City, MI

Offline majsnuff

  • Member
  • Posts: 149
  • Shoot low boys the bad guys are riding ponies.
Re: Rawhide finish
« Reply #8 on: February 18, 2009, 11:14:59 pm »
I have used TBIII over sinew, rawhide and snake skins to help prevent moisture problems with these hygroscopic materials. I have also just used TruOil or a combo of both for this.

what a great idea, I would have never thought of using tbIII as a finish.. thanks for the post
keep it simple
make it fun