« previous next »
Pages: [1]

Author Topic: Bamboo/Hickory Acceptable Adhesive?  (Read 3445 times)

0 Members and 1 Guest are viewing this topic.

PeteDavis

  • Guest
Bamboo/Hickory Acceptable Adhesive?
« on: November 19, 2008, 07:55:56 pm »
Hi All-

I just got a Rudder kit, bamboo and hickory. I am going to use stretch wrap for my glue up over a reflexed form.

Is Titebond III an acceptable adhesive as long as I prep the surfaces and allow sufficient drying?

PD
« Last Edit: November 19, 2008, 07:59:31 pm by PeteDavis »
Logged

Offline Hickoryswitch

  • Member
  • Posts: 339
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #1 on: November 19, 2008, 08:16:35 pm »
It should be just fine.  I glued one bow with 4 inches of perry reflex which they say is really hard on glue joints and it worked just fine. I'm pretty sure several guys on here use it to glue lams together.
Logged
Wayne Silverthorn

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #2 on: November 19, 2008, 08:27:08 pm »
I've used TBIII to glue boo backed hickory bows in Perry reflex with good results. I've never used shrink wrap but I have used inner tube bands to wrap the glue-up.   Pat 
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline David Long

  • Member
  • Posts: 134
  • Only dead fish swim with the stream.
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #3 on: November 19, 2008, 08:48:54 pm »
I have done several of those with Urac and spring clamps. Works great for me.
 Dave
Logged
NW Montana

Offline M-P

  • Member
  • Posts: 876
  • PA731115
    • Traveling Surgery
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #4 on: November 19, 2008, 09:01:09 pm »
I've done several bamboo backed ipe using tb II and inner tubes.  It works for me    Ron
Logged
"A man should make his own arrows."   Omaha proverb   

"There are three kinds of men. The one that learns by reading. The few who learn by observation. The rest of them have to pee on the electric fence for themselves."    Will Rogers

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #5 on: November 19, 2008, 09:44:18 pm »
  TB3 and clamps  has worked for me.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline sailordad

  • Member
  • Posts: 5,045
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #6 on: November 19, 2008, 10:36:18 pm »
in my experience the saran wrap works but is kind off a pain in the ars to deal with when trying to
wrap it tight enough to get a good glue line.
i prefer innter tube strips.they dont tear when trying to get them snug like the saran wrap.


                                                                               tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #7 on: November 19, 2008, 11:33:35 pm »
I used shrink wrap on my last bow which eventually did okay. But to be on the safe side, I would clamp it everywhere possible.
The only glue I use is resorcinol which has worked 100% for me.
Logged
When you're retired, every day is Saturday

Offline Jbell

  • Member
  • Posts: 256
Re: Bamboo/Hickory Acceptable Adhesive?
« Reply #8 on: November 19, 2008, 11:47:59 pm »
Urac 185 is what I use. I used tb2 on a couple of  R/D BBO's. I got joint creep on both bows one delaminated. But who knows it was probably my fault but I have never had a single problem with urac. I have also used epoxy with great results. Resorcinol is another great choice. Good luck.
Logged
Justin Blunt
Pages: [1]
« previous next »