« previous next »
Pages: [1]

Author Topic: Wych elm heartwood bow?  (Read 1172 times)

0 Members and 1 Guest are viewing this topic.

Offline stuckinthemud

  • Member
  • Posts: 2,355
    • avenue woodcarving
Wych elm heartwood bow?
« on: July 25, 2022, 04:54:57 pm »
I have a wych elm stave that is thick enough to split out a heartwood strip thick enough to build another bow.  Can you build an unbacked elm heartwood bow?
« Last Edit: July 25, 2022, 06:08:39 pm by stuckinthemud »
Logged

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Wych elm heartwood bow?
« Reply #1 on: July 25, 2022, 06:30:39 pm »
I don't think you will be able to split it. Witch elm has a very interlocked grain. Best to just band saw to a thickness you can work with and make firewood out of the waste.
Logged
Jim Davis

Kentucky--formerly Maine

bownarra

  • Guest
Re: Wych elm heartwood bow?
« Reply #2 on: July 26, 2022, 01:17:03 am »
Yes just chase the ring you want - no problem.
Logged

Offline meanewood

  • Member
  • Posts: 243
Re: Wych elm heartwood bow?
« Reply #3 on: July 28, 2022, 04:32:44 pm »
I have used Elm heartwood before, but have found it inferior to a bow made from sapwood or a combination of both.
It will be interesting to get your opinion based on 2 bows from the same stave.
Logged

bownarra

  • Guest
Re: Wych elm heartwood bow?
« Reply #4 on: July 29, 2022, 01:29:55 am »
Quote from: meanewood on July 28, 2022, 04:32:44 pm
I have used Elm heartwood before, but have found it inferior to a bow made from sapwood or a combination of both.
It will be interesting to get your opinion based on 2 bows from the same stave.

Me too - the stuff I used was the same as sapwood though...wood eh?!
Logged
Pages: [1]
« previous next »