« previous next »
Pages: [1]

Author Topic: Dilemma with hickory bow  (Read 1555 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawkdancer

  • Member
  • Posts: 5,040
Dilemma with hickory bow
« on: May 16, 2021, 07:08:48 pm »
I have a dilemma with the shag bark hickory stave I am working on.  There is a pin knot
Bump on the upper limb about 8” out from the fade, kinda on the edge and about 13/16”
thick on the back of the stave.  My initial reaction is to decrown the bump and either
Back with rawhide or make a Meade Heath type wrap. Target draw weight is 40-45#,
I have pictures, but my Imgur access is stuck right now.
Hawkdancer
Logged
Life is far too serious to be taken that way!
Jerry

Offline HH~

  • Member
  • Posts: 1,742
Re: Dilemma with hickory bow
« Reply #1 on: May 16, 2021, 10:05:23 pm »
Leave it. Just built a bow with a girl from Al during 23rd classic. Had a big lump on back right in upper limb in the working section. Was Pignut but bow came in over weight and very snappy. Dont think itll create much issue unless it’s a hunchback lump.

HH~
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Dilemma with hickory bow
« Reply #2 on: May 18, 2021, 10:42:28 am »
Totally agree with Shawn. Do follow the grain on the belly so the limb is not way thicker at the knot.

Also, Imgur is a total waste of effort. Just click "Attachments and other options" below and post image direct from your computer or phone.
Logged
Jim Davis

Kentucky--formerly Maine
Pages: [1]
« previous next »