2021 1st Newbie build along challenge

[Zugul]

it's a pyramid style selfbow, 2" wide at the fades with a straight taper to 5/8" at the nocks. The handle is still a bit too wide, but I'll narrow it down a little as I finish the bow.

[Allyn T]

I'm not qualified to give advice but i enjoy watching other people work on their bows so keep the pics coming : )

[Zugul]

today's progress: I weakened a bit the right limb (top limb) and scraped some spots that seemed stiffer. The bow is still a lot stronger then I need it but seems decently tillered at this point, so I hope to have some room for final adjustments.

[eastcreekarchery]

Mid left limb in that pic looks like it could bend more.

[eastcreekarchery]

I'll start ring chasing soon folks. Sorry about the delay!

[Digital Caveman]

Mid left looks a bit stiff, though it may not be if there is natural reflex there.  it looks like there is a slight hinge right out of the right fade.

[Zugul]

Yes, it does look like it should bend more, even if that spot is thinner then the outer limb... That's why I didn't srape much off from there.
Tradcraftsman:  yes, there's a bit of reflex in the outer 1/2 left limb; you're correct about that slight hinge too, that's a thin spot... I'll have to scape above and below it to make it bend evenly.

ps: I'll try to take a better pic next time 

[Deerhunter21]

i probably need to get my tools in working order. my scraper isnt sharp, im trying but i dont know if i can get that bur... my drawknife is chipped and is very dull, my vise is loose... Time for shop matinence!!!! 

[Black Moshannon]

Ill get my elm D bow im starting in here when I get home in three days. So far its been reduced to around 1/14 wide full length by 3/4 inch thick by 64” long and has black locust tip overlays glued on. Plan on having it come out 55# at 27”.

[Allyn T]

Bad news is my current bow isn't going to work, good news is I can start on my newbie challenge bow now

[Fox]

sorry to hear you last bow didn't work out  Allyn! looking good zugul.... making some progress on this super funky stave... Big S wiggle so a tiny bit of steaming to get the sting on the handle... a little fixing reflex, and now am floor tillering! taking it slow cause this stave is really funky ! I'm not totally positive with its aesthetic right now, but hopefully ill get that sorted out soon enough!


Untitled by Livvydog, on FlickrUntitled by Livvydog, on Untitled by Livvydog, on FlickrUntitled by Livvydog, on Flickr

[PaSteve]

Enjoying watching this develop. Keep the pictures coming. Great idea guys.

[Allyn T]

Ill get my elm D bow im starting in here when I get home in three days. So far its been reduced to around 1/14 wide full length by 3/4 inch thick by 64” long and has black locust tip overlays glued on. Plan on having it come out 55# at 27”.

I REALLY liked your last bow I'm sure this one will be awesome.

Fox looks like your making progress it's gonna be a cool looking bow

[Zugul]

today I did just a bit of tillering, trying to make some spots bend a little more. I think yesterday I was drawing the bow a bit too much for the poundage I want to get (35-40# at 28"), so today I didn't draw it as much. I also shortened a bit the long string, now it's at zero brace height.

IMG_20210127_170426716 by Mattia Zuccolo, su Flickr

IMG_20210127_170637774 by Mattia Zuccolo, su Flickr

[Deerhunter21]

looking good all!!! I got one limb down to roughly 1/2 an inch im just gonna flatten out all the bumps and make it completely even before i move on to the next one