Yew tiller input please

[snag]

This is a 64” ntn yew bow. I heat bent the outer 9” to put a slight bit of reflex.
In this picture I have it bent at 15”. It has 3/8”+ tiller.

[snag]

Another view.

[DC]

You want a picture of the whole bow from straight on. No angles or part shots.

[snag]

Is that ok?

[Marc St Louis]

Your outer limbs don't seem to be working very much

[snag]

I was wondering about the outer third. I’ll address that. Thanks.

[bownarra]

Be careful mid limb but get the outers working more.

[snag]

Will do. Thanks!

[Dances with squirrels]

Need pictures of the whole bow, straight on unbraced, and braced.

[snag]

Braced picture

[snag]

Unbraced...

[DC]

It looks pretty good but you're still standing off at an angle. If you were at 90° to the bow the top of the bench would be a straight level line across the picture.

[snag]

Gotcha. I’ll try again. My shop is a bit crowded right now. But I will rearrange things and get a more direct shot. Thanks

[Del the cat]

It looks pretty good but you're still standing off at an angle. If you were at 90° to the bow the top of the bench would be a straight level line across the picture.

That's why I haven't chimed in... the pics weren't good enough to see what's happening 
Del

[snag]

I will get some better ones up today. Thanks