« previous next »
Pages: [1] 2

Author Topic: 64in NTN Osage what do you see?  (Read 3389 times)

0 Members and 1 Guest are viewing this topic.

Offline HighEagle

  • Member
  • Posts: 227
64in NTN Osage what do you see?
« on: February 11, 2020, 01:08:13 am »
Just started this bow 64in NTN Osage  pulled 53lbs on the long string at 20in. Do you see any problems? I have heated treated and think I would like to flip the tips now, Any suggestions, I would hate to bust this one 

Thanks for looking Chuck
« Last Edit: February 11, 2020, 08:59:44 am by HighEagle »
Logged
Armstrong, BC

Offline RyanY

  • Member
  • Posts: 1,999
Re: 64in NTN Osage what do you see?
« Reply #1 on: February 11, 2020, 05:57:04 am »
I would really shorten the long string. Looks like the right limb is more elliptical and the left limb more circular. Depends on your front profile but both look pretty smooth to me so far.
Logged

Offline HH~

  • Member
  • Posts: 1,742
Re: 64in NTN Osage what do you see?
« Reply #2 on: February 11, 2020, 06:27:54 am »
Get it to full brace before I would do anything else and see how looks and feels in the hand. That's what really a shooter. A decent shooter can shoot most anything but a good shooter bow about shoots itself.

Shawn~
Logged
MAFA: Makin America Free Again

Long is the road, Hard is the way.

Mother Gue never raised such a foolish child. . . .

Readily will I display the intestinal fortitude required to fight onto the Ranger objective and complete the mission though I be the lone survivor. RLTW

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: 64in NTN Osage what do you see?
« Reply #3 on: February 11, 2020, 06:45:54 am »
Looks pretty good to me, I would do as Ryan said and shorten the long string as short as you can, that will change things, you can also stretch a string from tip to tip and see roughly what it would look like braced.  :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: 64in NTN Osage what do you see?
« Reply #4 on: February 11, 2020, 09:34:35 am »
As suggested,..get it braced...
No need to flip tips,..unless u just want to...
Has nice reflex
Logged

Offline HighEagle

  • Member
  • Posts: 227
Re: 64in NTN Osage what do you see?
« Reply #5 on: February 17, 2020, 08:54:51 pm »
About  my 5th time trying to post this update,

  Brace pic 5.25"
  FD pic Approx 50@25.5"
  On the tree 48@25" and 51@26"

  Bow has taken very little set so far.    At 25.5" in the hand bow is starting to stack a bit, Hope it will smooth out at goal draw 27"
Logged
Armstrong, BC

Offline HighEagle

  • Member
  • Posts: 227
Re: 64in NTN Osage what do you see?
« Reply #6 on: February 17, 2020, 09:45:48 pm »
sorry never had so much trouble posting pix .Do you see any problems? 

Thanks Chuck
Logged
Armstrong, BC

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: 64in NTN Osage what do you see?
« Reply #7 on: February 18, 2020, 06:47:48 am »
  I see just out of the upper fade slightly stiff, just a few scrapes...Looks balanced...Nice work
                                                                                                                                          Don
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline HighEagle

  • Member
  • Posts: 227
Re: 64in NTN Osage what do you see?
« Reply #8 on: February 18, 2020, 06:56:32 am »
I was going to ask if the fades looked stiff, Do my tips look like they are bending enough? always seems to be one of my big problems

thanks for the help Chuck
Logged
Armstrong, BC

Offline burchett.donald

  • Member
  • Posts: 2,437
Re: 64in NTN Osage what do you see?
« Reply #9 on: February 18, 2020, 07:00:02 am »
 Yes, slightly reflexed tips look fine...Maybe a few scrapes here at the black line...
                                                                                                                           Don
« Last Edit: February 18, 2020, 07:12:04 am by burchett.donald »
Logged
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline HighEagle

  • Member
  • Posts: 227
Re: 64in NTN Osage what do you see?
« Reply #10 on: February 18, 2020, 07:24:07 am »
Yes I can see that Right in the middle of the black line you made is a low dip and thicker on both sides. do you think I keep taking scraps off each side of middle? or the high side of middle?

   Thanks Chuck
Logged
Armstrong, BC

Offline TimBo

  • Member
  • Posts: 1,047
Re: 64in NTN Osage what do you see?
« Reply #11 on: February 18, 2020, 11:02:51 am »
I would go over that area with external calipers, or just "two finger" calipers.  Looking at the unbraced photo, it seems like an area where you need to pay attention to getting a smooth thickness taper more that strictly how it looks.  Just my $0.02...it would be easy to take too much off there.
Logged

Offline HighEagle

  • Member
  • Posts: 227
Re: 64in NTN Osage what do you see?
« Reply #12 on: February 19, 2020, 01:46:58 am »
After a few scrapes off the upper limb, Any better?

Chuck
Logged
Armstrong, BC

Offline HighEagle

  • Member
  • Posts: 227
Re: 64in NTN Osage what do you see?
« Reply #13 on: February 19, 2020, 02:20:21 am »
two more pix in hand 48lbs at 25.5in

 Thanks for the help Chuck
Logged
Armstrong, BC

Offline HighEagle

  • Member
  • Posts: 227
Re: 64in NTN Osage what do you see?
« Reply #14 on: February 19, 2020, 02:30:48 am »
Having a heck of a time posting these pix, why are they coming out rotated? and will not resize without difficulty
Logged
Armstrong, BC
Pages: [1] 2
« previous next »