« previous next »
Pages: [1] 2

Author Topic: Does this heat treat look dark enough?  (Read 3401 times)

0 Members and 1 Guest are viewing this topic.

Offline IrishJay

  • Member
  • Posts: 442
Does this heat treat look dark enough?
« on: November 22, 2019, 11:34:42 am »
In light of some recent discussion on here about heat treating, specifically depth of penetration, I came to to the conclusion that I've been working with the heat gun too close to the wood. This makes the surface brown up quickly, but doesn't give the heat time to penetrate much.

I spent about 20 min on the toasted part of this limb with the gun further away. As a result I was able to feel heat all the way through to the back.

Does it look dark enough? Or should I go over it again?

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Eric Garza

  • Member
  • Posts: 589
Re: Does this heat treat look dark enough?
« Reply #1 on: November 22, 2019, 01:13:52 pm »
If anything, I would say it is too dark. I do not try to scorch the belly of a bow by heat treating it. My goal is to get the limb hot and keep it that way for 10-20 minutes. The surface does darken, but not that much and the color change is an outcome of heat treating, not a goal in itself.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Does this heat treat look dark enough?
« Reply #2 on: November 22, 2019, 01:16:46 pm »
It looks about right. That said it varies from species to species and from tree to tree. I just did that Yew and I had it up to 450°f and it hardly browned at all. You should hold the gun about 3 1/2-4" from the wood.
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: Does this heat treat look dark enough?
« Reply #3 on: November 22, 2019, 01:19:48 pm »
 I do the same as Eric, I keep my gun very close but also keep it moving. I never scorch the limb, it only gets slightly darker.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Does this heat treat look dark enough?
« Reply #4 on: November 22, 2019, 01:56:22 pm »
Ended up spending over an hour on one limb. I think I got as much penetration as possible, belly ended up a fairly even chocolate brown.

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline Eric Garza

  • Member
  • Posts: 589
Re: Does this heat treat look dark enough?
« Reply #5 on: November 22, 2019, 04:53:07 pm »
I should add that I learned my technique from Steve (Badger). I set my caul up so that there are places where I can touch the back of the bow, and heat the limb until the back is hot, not just the belly. I then keep heating to keep the back hot for 10-20 minutes. I spend 30-40 minutes on each limb. I keep the heat gun fairly close to the limb, maybe a couple inches away.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Does this heat treat look dark enough?
« Reply #6 on: November 22, 2019, 05:06:14 pm »
Did you use a form?  The limb looks like it's going two different ways.
Logged

Offline IrishJay

  • Member
  • Posts: 442
Re: Does this heat treat look dark enough?
« Reply #7 on: November 22, 2019, 05:13:42 pm »
Pat, limb has a curve in it but the tips align nicely. String lines up well on the handle and nothing twists when its drawn.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline IrishJay

  • Member
  • Posts: 442
Re: Does this heat treat look dark enough?
« Reply #8 on: November 22, 2019, 06:16:17 pm »
Heres the back of that same limb, i think the other camera angle exaggerated the curve in it.

Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bushboy

  • Member
  • Posts: 2,256
Re: Does this heat treat look dark enough?
« Reply #9 on: November 22, 2019, 06:32:50 pm »
Is that elm?heat treating areas that don't bend ,unless stiffening reasons is a waste in my opinion.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline IrishJay

  • Member
  • Posts: 442
Re: Does this heat treat look dark enough?
« Reply #10 on: November 22, 2019, 06:57:34 pm »
I think its hickory. Also the whole bow bends. The handle doesn't bend much but it does bend.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bushboy

  • Member
  • Posts: 2,256
Re: Does this heat treat look dark enough?
« Reply #11 on: November 22, 2019, 07:01:28 pm »
Im pretty sure it's elm and it shouldn't bend through the handle judging by your design.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline bushboy

  • Member
  • Posts: 2,256
Re: Does this heat treat look dark enough?
« Reply #12 on: November 22, 2019, 07:03:23 pm »
Jay,did you have it tillered before heat treating?
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline IrishJay

  • Member
  • Posts: 442
Re: Does this heat treat look dark enough?
« Reply #13 on: November 22, 2019, 07:19:43 pm »
Yeah it was tillered to 46#@28". Depending how much weight it gains from heat treat I may have to make a few more scrapes to bring it back down a little. Its for my dad and he likes to stay <50#.
Logged
"The best camouflage pattern is called, 'Sit down and be quiet!' Your grandpa hunted deer in a red plaid coat, think about that for a second." - Fred Bear

Offline bushboy

  • Member
  • Posts: 2,256
Re: Does this heat treat look dark enough?
« Reply #14 on: November 22, 2019, 07:29:37 pm »
Well judging by your heat treating I would guess it's closer to 60 now.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.
Pages: [1] 2
« previous next »