« previous next »
Pages: [1] 2

Author Topic: New steam set up  (Read 4351 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
New steam set up
« on: August 29, 2018, 04:44:58 pm »
 I made a quick steam tube out of some PVC pipe for the Marshall bow shoot.  It worked pretty good but there was room for improvement.  My good buddy Derik aka "Bowtarist" offered to make me a better version made out of aluminum.  I put the finishing touches on it today.  It's 44" long so I can steam half a bow at a time.  I use a wallpaper steamer with it.  That is very easy to use and puts off plenty of steam for a bow. 




I drilled a hole just big enough to squeeze the steam hose into.




This is what I came up with on the first PVC tube and it worked great.  I screwed the thick rubber to a wood plug and cut slots in it.  The bow can slide in and it makes a good seal around it.  No more messing with aluminum foil or rags trying to keep the steam in. 




The opening in the wood plug is 2"x2" behind the rubber so I can fit a bow handle in there if I needed to.

Logged
I started out with nothin' and I still got most of it left

Offline PaSteve

  • Member
  • Posts: 816
Re: New steam set up
« Reply #1 on: August 29, 2018, 05:03:31 pm »
That's really nice. Great idea.
Logged
"It seems so much more obvious with bows than with other matters, that we are the guardians of the prize we seek." Dean Torges

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: New steam set up
« Reply #2 on: August 29, 2018, 05:05:55 pm »
That setup appears to be effective. Congrats, bud!

Assume ya got the steamer for . . . . . FREE!   
 ::)
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: New steam set up
« Reply #3 on: August 29, 2018, 06:06:09 pm »
That's a gooder!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline DC

  • Member
  • Posts: 10,396
Re: New steam set up
« Reply #4 on: August 29, 2018, 06:07:37 pm »
I like that. You should mount it to the wall and have a steam center like Simon does. You need a hole for the steam to get out. Lots of flow gets it hotter. You should also drill a small hole on the cold end so you can stick a kitchen thermometer in it. It's nice to know the temp. A little insulation wouldn't hurt, that pipe is going to get hot.
Logged

Offline Mark Smeltzer

  • Member
  • Posts: 324
Re: New steam set up
« Reply #5 on: August 29, 2018, 06:14:02 pm »
I need one of those. Thanks for sharing that.
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: New steam set up
« Reply #6 on: August 29, 2018, 06:15:05 pm »
Quote from: Knoll on August 29, 2018, 05:05:55 pm
That setup appears to be effective. Congrats, bud!

Assume ya got the steamer for . . . . . FREE!   
 ::)

I got it used from the big auction site for under $20
Logged
I started out with nothin' and I still got most of it left

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: New steam set up
« Reply #7 on: August 29, 2018, 06:47:21 pm »
Looks pretty slick  Clint. Much nicer than my steam setup.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: New steam set up
« Reply #8 on: August 30, 2018, 01:00:38 am »
That rubber end cap with the slits looks really good :)
Del
Logged
Health warning, these posts may contain traces of nut.

Offline chamookman

  • Member
  • Posts: 3,026
Re: New steam set up
« Reply #9 on: August 30, 2018, 04:07:42 am »
Nice  :OK ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Aaron H

  • Member
  • Posts: 3,437
Re: New steam set up
« Reply #10 on: August 30, 2018, 04:29:49 am »
I second what DC said, wrap that thing in insulation. Aluminum dissipates heat very well, so it's gonna be just as hot on the outside as on the inside.

I really like what you did with the opening, that's pretty neat
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: New steam set up
« Reply #11 on: August 30, 2018, 05:35:58 am »
I could get an old blanket or something to wrap around it.  I like keeping it portable so I can take it to different bow gatherings. 
Logged
I started out with nothin' and I still got most of it left

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: New steam set up
« Reply #12 on: August 30, 2018, 05:42:59 am »
I used the old version a few times, it worked great. But I can see how this version may be even better. Hopefully the aluminum doesn't dissipate the heat too quickly.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: New steam set up
« Reply #13 on: August 30, 2018, 05:49:31 am »
Maybe you could get that foam stuff they put on hot water pipes. Or even one of those swimming noodles.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: New steam set up
« Reply #14 on: August 30, 2018, 06:34:55 am »
I'll figure out some way to insulate it.  I'm going to put some caution HOT signs on it also. 
Logged
I started out with nothin' and I still got most of it left
Pages: [1] 2
« previous next »