Author Topic: Copy cat sorta  (Read 10752 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
Copy cat sorta
« on: April 07, 2018, 08:44:35 pm »
I saw the Viking necker and I had a couple of hours so I decided to get one going too. I used an old Simmons file, fired up the forge and when it got that file hot I started the tip, then roughed in the bevels. Then I cut the tang out and I hope tomorrow I can get it drawn out enough for the handle
« Last Edit: April 07, 2018, 11:51:03 pm by bubby »
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline KHalverson

  • Member
  • Posts: 758
Re: Copy cat sorta
« Reply #1 on: April 08, 2018, 05:08:14 pm »
cant wait to see its progression.

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Copy cat sorta
« Reply #2 on: April 08, 2018, 08:23:48 pm »
Looks like it's going to be a nice one Bubby.

Offline bubby

  • Member
  • Posts: 11,054
Re: Copy cat sorta
« Reply #3 on: April 08, 2018, 08:44:30 pm »
I got a start on the tang and ran out of propane, 👀 oh well
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: Copy cat sorta
« Reply #4 on: April 18, 2018, 05:33:24 am »
Looks good so far. (-P
Bjrogg
A hot cup of coffee and a beautiful sunrise

Offline bubby

  • Member
  • Posts: 11,054
Re: Copy cat sorta
« Reply #5 on: April 30, 2018, 07:04:59 pm »
This is after the last thermocycle. When it cools good I go for heat treat, I'm thinking about a hamon on this little necker but not sure yet
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: Copy cat sorta
« Reply #6 on: April 30, 2018, 07:07:03 pm »
Here's a pic before I bent the handle
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Copy cat sorta
« Reply #7 on: April 30, 2018, 08:14:49 pm »
You're getting to be a pro at this. I'd go for the hamon.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline bubby

  • Member
  • Posts: 11,054
Re: Copy cat sorta
« Reply #8 on: April 30, 2018, 08:28:01 pm »
Well I was in a hurry and didn't do the hamon
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline KHalverson

  • Member
  • Posts: 758
Re: Copy cat sorta
« Reply #9 on: May 01, 2018, 05:50:16 am »
Looks good.

Offline bubby

  • Member
  • Posts: 11,054
Re: Copy cat sorta
« Reply #10 on: May 01, 2018, 08:26:30 pm »
All finished, dipped in ferric chloride and cleaned up, hope you guys like it
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Hawkdancer

  • Member
  • Posts: 5,040
Re: Copy cat sorta
« Reply #11 on: May 01, 2018, 11:19:55 pm »
Nice!
Hawkdancer
Life is far too serious to be taken that way!
Jerry

Offline Stoner

  • Member
  • Posts: 356
Re: Copy cat sorta
« Reply #12 on: May 07, 2018, 04:14:09 am »
That's a dandy, I like it !  John

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Copy cat sorta
« Reply #13 on: May 07, 2018, 07:13:59 am »
Really like that one, Bubby
DBar
Integrity is doing the right thing when no one is looking

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: Copy cat sorta
« Reply #14 on: May 07, 2018, 10:53:50 am »
Am sure new owner will like it mucho.
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857