Author Topic: Round off edges  (Read 5301 times)

0 Members and 1 Guest are viewing this topic.

Offline John K

  • Member
  • Posts: 1,936
Round off edges
« on: March 25, 2008, 02:15:30 pm »
Do you round off the edges of you'r bow like you would a board bow  ???

Thanks John
The only way to fail is to never start !

Offline carpenter374

  • Member
  • Posts: 205
Re: Round off edges
« Reply #1 on: March 25, 2008, 02:37:55 pm »
on a stave bow where you follow one growth ring its not such a big concern. you might round them off just a lil bit so theyre not sharp.
"Those who would sacrifice their freedom for safety will find that they will inherit neither." -Ben Franklin     

--Carpenter

Offline John K

  • Member
  • Posts: 1,936
Re: Round off edges
« Reply #2 on: March 25, 2008, 02:46:41 pm »
Thanks Carpenter, the sides are sharp and i thought it would look a little nicer too  8)
The only way to fail is to never start !

Offline DanaM

  • Member
  • Posts: 9,211
Re: Round off edges
« Reply #3 on: March 25, 2008, 02:50:35 pm »
I round all mine off some like ya said looks nicer.
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Round off edges
« Reply #4 on: March 25, 2008, 02:56:41 pm »
I round all mine off some like ya said looks nicer.
;D  ;D  ;D
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Round off edges
« Reply #5 on: March 25, 2008, 02:58:42 pm »
I always take a pocket knife held at around 90 degrees (like a scraper) and round the edges. It looks better, and more importantly, helps keep splinters from popping up on the edges.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Round off edges
« Reply #6 on: March 25, 2008, 03:27:45 pm »
Yes, I do. I use my knife too. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline NOMADIC PIRATE

  • Member
  • Posts: 1,910
Re: Round off edges
« Reply #7 on: March 25, 2008, 05:33:33 pm »
Always :)
NORTH SHORE, HAWAII

Offline adb

  • Member
  • Posts: 5,339
Re: Round off edges
« Reply #8 on: March 25, 2008, 06:12:23 pm »
Yes. I think a large part of bowmaking involves changing evrything from ugly and squarey, to roundey and beautiful.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Round off edges
« Reply #9 on: March 26, 2008, 02:35:59 am »
Yes. Most if not all of the edges are unnecessary weight. You can remove it by rounding with no effect on the tiller or draw weight.    Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Round off edges
« Reply #10 on: March 26, 2008, 07:39:56 am »
Just lightly,enough to get the sharp edge off,belly and back,belly a little more. :)
    Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Round off edges
« Reply #11 on: March 26, 2008, 08:00:13 am »
All the time. I round the back more than the belly and use sandpaper down to fine grit, on the edges not the back
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Round off edges
« Reply #12 on: March 26, 2008, 10:09:19 am »
Yep, back and more so on the belly...especially near the tips.
Greg

A rich person can be poor monetarily, the best things in life are free...