« previous next »
Pages: [1]

Author Topic: Knot in handle?  (Read 2103 times)

0 Members and 2 Guests are viewing this topic.

Offline Chuck.e.b

  • Member
  • Posts: 61
Knot in handle?
« on: January 08, 2018, 10:48:00 am »
Is it possible to make a bow with a knot on the back on the handle? Center of handle. Hackberry.
Logged

Offline S.C. hunter

  • Member
  • Posts: 139
  • does a possum have enough brains to tan his hide ?
Re: Knot in handle?
« Reply #1 on: January 08, 2018, 11:19:59 am »
Chuck,
 I think it depends on the size of the knot, how it goes through the handle etc.    You need to post some pic's if possible, I guarantee you the guys here can help you.
   Steve
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Knot in handle?
« Reply #2 on: January 08, 2018, 11:29:12 am »
Generally with a stiff handle you will be OK.  You might want to fill any voids with something. I like super glue and if the void is big enough I add saw dust as a filler. For a good size void I do this in stages to be sure the void is eliminated. To do this a put super glue in the hole then sprinkle sawdust in, let it dry and do it again...and again until the void is filled. For a large void you may want to add a wood plug.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Chuck.e.b

  • Member
  • Posts: 61
Re: Knot in handle?
« Reply #3 on: January 08, 2018, 11:32:14 am »
No voids. I'll get some pics tonight.

Also what's better thicker rings or thinner rings?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Knot in handle?
« Reply #4 on: January 08, 2018, 11:35:04 am »
I prefer thinner but everyone has their own opinions on this.
 If there are no voids I like to add super glue just because but especially if it's on the back too.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Knot in handle?
« Reply #5 on: January 08, 2018, 12:56:21 pm »
I'd rather the knot be in the middle of the handle than in the middle of the limb. 

I would rather one in the middle of the limb than in the edge of a fade out.

I would rather one in the edge of a fade out than in the tip of a limb.

I never want one on the tip of the limb.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Chuck.e.b

  • Member
  • Posts: 61
Re: Knot in handle?
« Reply #6 on: January 08, 2018, 08:02:20 pm »
Pics
Logged

Offline Chuck.e.b

  • Member
  • Posts: 61
Re: Knot in handle?
« Reply #7 on: January 08, 2018, 08:04:13 pm »
Another.
Logged

Offline Drewster

  • Member
  • Posts: 687
Re: Knot in handle?
« Reply #8 on: January 08, 2018, 09:47:26 pm »
That knot doesn't appear it will be any problem at all.  Looks solid and if it's in the handle, it won't be bending anyway.  Go for it.0
Logged
Drew - Boone, NC

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Knot in handle?
« Reply #9 on: January 08, 2018, 09:49:22 pm »
That knot should not be a problem.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: Knot in handle?
« Reply #10 on: January 08, 2018, 10:14:24 pm »
I don't see any problem at all. 

Sometimes if the knot is adjustable, i.e. If you can adjust handle positions.  I have used a knot area as an arrow shelf.  I normally have to file it all out but the left over grain is beautiful!
Good luck,  thats a nice stave!

Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline DC

  • Member
  • Posts: 10,396
Re: Knot in handle?
« Reply #11 on: January 08, 2018, 10:20:01 pm »
If you have the length you can position the knot so that it hits your hand in a certain position. It makes it easier to hold the bow the same every shot.
Logged

Offline Chuck.e.b

  • Member
  • Posts: 61
Re: Knot in handle?
« Reply #12 on: January 08, 2018, 10:26:56 pm »
Thanks everyone!
Logged
Pages: [1]
« previous next »