Author Topic: Airbrushing trueoil  (Read 1699 times)

0 Members and 1 Guest are viewing this topic.

Offline High-Desert

  • Member
  • Posts: 876
Airbrushing trueoil
« on: May 25, 2017, 04:27:38 pm »
Has anyone tried airbrushing truoil? I figure it may need to be thinned with mineral spirits. I want to spray a sturgeon skinned backing to avoid bad runs. Or is there something else I should be using on sturgeon skins
Eric

Offline Stoker

  • Member
  • Posts: 1,729
Re: Airbrushing trueoil
« Reply #1 on: May 25, 2017, 04:50:38 pm »
Never sprayed it. Dab it on with a sponge brush. You can pick up runs and keep it even.. Use fairly dry.. Patience
Thanks Leroy
Bacon is food DUCT tape - Cipriano

Offline PatM

  • Member
  • Posts: 6,737
Re: Airbrushing trueoil
« Reply #2 on: May 25, 2017, 08:21:34 pm »
How are you getting runs? It shouldn't be hard to just wipe it on in thin coats.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Airbrushing trueoil
« Reply #3 on: May 25, 2017, 08:38:52 pm »
I use mu finger with about 15 thin coats.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline jeffhalfrack

  • Member
  • Posts: 438
Re: Airbrushing trueoil
« Reply #4 on: May 25, 2017, 09:39:09 pm »
They used to sell it in a rattle can it worked good . Jeffw

Offline High-Desert

  • Member
  • Posts: 876
Re: Airbrushing trueoil
« Reply #5 on: May 25, 2017, 10:26:07 pm »
I'm not getting runs, but I've never applied it to a rough surface like sturgeon skin. I didn't want to screw it up. I'll dabbing with a sponge
Eric