Author Topic: Today's Osage harvest  (Read 2375 times)

0 Members and 1 Guest are viewing this topic.

Offline justsomedude

  • Member
  • Posts: 130
Today's Osage harvest
« on: February 21, 2017, 02:55:17 pm »
From a tree that grew horizontally and was fairly dead

7-8" diameter 74" at the longest. One side has a branch...there will be knots on about 1/4th of each side.  About a 90 degree twist. Not Too ambitious is it?
Rings look good.

Offline justsomedude

  • Member
  • Posts: 130
Re: Today's Osage harvest
« Reply #1 on: February 21, 2017, 05:10:26 pm »
Splits....

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Today's Osage harvest
« Reply #2 on: February 21, 2017, 05:58:17 pm »
Looks like there is some bows in there I don't know if those spiral grain peaces are bow worthy unless you have enough length  on the strait grain to get some billets I have a few of those spiral grain peaces in my last haul  that I'm going to cut for turning bowls or candle holders ,vases etc
If you fear failure you will never Try !

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Today's Osage harvest
« Reply #3 on: February 21, 2017, 08:09:26 pm »
Did you mark the top side of the log?
DBar
Integrity is doing the right thing when no one is looking

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Today's Osage harvest
« Reply #4 on: February 21, 2017, 08:45:42 pm »
There are some bows in there but it will take some untwisting to find them. 
I started out with nothin' and I still got most of it left

Offline justsomedude

  • Member
  • Posts: 130
Re: Today's Osage harvest
« Reply #5 on: February 21, 2017, 10:05:12 pm »
Did you mark the top side of the log?
DBar
Do you mean which side was the top before I cut it?

Offline justsomedude

  • Member
  • Posts: 130
Re: Today's Osage harvest
« Reply #6 on: February 21, 2017, 10:08:48 pm »
There are a couple of promising staves. If I stay to the inside of the curves (assuming the wood is good) and if I cut down to a 66" bow, I can avoid the worst bits. There are definitely some good short bows in there....I want to try some short Pyramid bows for my kids while I keep an eye out for a good 69" for myself.

Offline Stick Bender

  • Member
  • Posts: 2,003
Re: Today's Osage harvest
« Reply #7 on: February 22, 2017, 06:13:08 am »
66 in. Handled Osage Bow will work fine for you too if your draw is under 30 in.  If the wood is decent & you have enough width & you could make a 60 in bendy for your self also !  It always amazes me how little wood you need to make a bow out of hedge !
If you fear failure you will never Try !

Offline justsomedude

  • Member
  • Posts: 130
Re: Today's Osage harvest
« Reply #8 on: February 22, 2017, 07:50:26 pm »
I worked one down today....OUCH. There was a big check line down the middle but I could tell that it didn't go all the way through...ended up going a good 3/4" in. I kept losing my ring. I THINK I got it lined back up. Was a good exercise.

Offline BowEd

  • Member
  • Posts: 9,390
  • BowEd
Re: Today's Osage harvest
« Reply #9 on: February 22, 2017, 08:01:02 pm »
Looks like good rings on that log.Your saw must have been dull....lol.
BowEd
You got to stand for something or you'll fall for anything.
Ed

Offline justsomedude

  • Member
  • Posts: 130
Re: Today's Osage harvest
« Reply #10 on: February 22, 2017, 08:02:25 pm »
Yeah...I need a new chain

Offline Selfbowman

  • Member
  • Posts: 3,161
Re: Today's Osage harvest
« Reply #11 on: February 22, 2017, 11:40:54 pm »
looks good after second look. Arvin
« Last Edit: February 22, 2017, 11:43:58 pm by Selfbowman »
Well I'll say!!  Osage is king!!

Offline justsomedude

  • Member
  • Posts: 130
Re: Today's Osage harvest
« Reply #12 on: February 22, 2017, 11:53:28 pm »
Sadly...the one I was working today was just declared "a walking stick". There was a wierd internal split/twist and I ended up with grain runout at one end. Osage walking sticks look great though....just takes a few minutes on the belt sander.

Offline justsomedude

  • Member
  • Posts: 130
Re: Today's Osage harvest
« Reply #13 on: February 23, 2017, 03:10:33 pm »
Started this one today. It had worm holes in one end so it's going to be 56" end to end

Offline joachimM

  • Member
  • Posts: 675
  • Good - better - broken
Re: Today's Osage harvest
« Reply #14 on: February 23, 2017, 05:12:24 pm »
Yeah...I need a new chain

you probably just need to sharpen it. easy enough with the right and cheap hand tools. Google it, youtube it...