« previous next »
Pages: 1 [2]

Author Topic: D bow from the ground up  (Read 4907 times)

0 Members and 1 Guest are viewing this topic.

Offline Swamp Thang

  • Member
  • Posts: 323
Re: D bow from the ground up
« Reply #15 on: October 04, 2016, 10:35:20 pm »
How thick is that?
Logged

Offline Thunder

  • Member
  • Posts: 240
Re: D bow from the ground up
« Reply #16 on: October 04, 2016, 10:53:55 pm »
I'm not sure about the Cedar Elm but I'm sure it's worth a try. There's not a whole lot of work put into these small saplings.  This one is 1 1/8" wide and 11/16" thick at the handle.
Logged
"The two most important days in your life are the day you are born...and the day you find out why."  Mark Twain

Offline Swamp Thang

  • Member
  • Posts: 323
Re: D bow from the ground up
« Reply #17 on: October 05, 2016, 04:14:52 pm »
 So I got sick while hunting had to call it a day this is the only stave I managed to grab it's an elm. The decisions are top circumference 5 1/4" the bottom 6 1/2"  total length 100" enough for a few bows. Okay bark is stripped. Do we leave the cabium on to dry?
« Last Edit: October 05, 2016, 04:18:21 pm by Swamp Thang »
Logged

Offline Thunder

  • Member
  • Posts: 240
Re: D bow from the ground up
« Reply #18 on: October 05, 2016, 10:33:47 pm »
Nice find....it might check on you if you don't seal it with something (ie white glue, shellac, polyurethane) You can take some of the cambium layer off now or later to leave a cool mottled effect.
Logged
"The two most important days in your life are the day you are born...and the day you find out why."  Mark Twain

Offline Swamp Thang

  • Member
  • Posts: 323
Re: D bow from the ground up
« Reply #19 on: October 06, 2016, 07:38:47 am »
Follow your advice left a little on for contrast really cut it in half last night and it started to split along the stave so I finished cutting managed to split and save one of the longer halves the other I didn't split left whole and spread tallow across the surface. Oh and for how straight it was has some twisted grain.....
Logged

Offline Swamp Thang

  • Member
  • Posts: 323
Re: D bow from the ground up
« Reply #20 on: November 09, 2016, 08:46:53 am »
So the stave is roughed and pretillered I'll post pics soon
Logged

Offline High-Desert

  • Member
  • Posts: 876
Re: D bow from the ground up
« Reply #21 on: November 09, 2016, 10:11:21 am »
These build are great, love when they come together by input from everyone's ideas.
Logged
Eric

Offline Swamp Thang

  • Member
  • Posts: 323
Re: D bow from the ground up
« Reply #22 on: November 18, 2016, 09:48:31 pm »
Okay so having trouble finding a good resized that keeps enough quality to still see the detail. Bit I'll tell you this so far at 50"  pulling to 19" it's 42# with an inch and a quarter of set
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: D bow from the ground up
« Reply #23 on: November 18, 2016, 11:04:41 pm »
Just get a free photobucket account it resizes the pics for you
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: 1 [2]
« previous next »