« previous next »
Pages: [1]

Author Topic: Mollegabet bow questions  (Read 1822 times)

0 Members and 2 Guests are viewing this topic.

Offline FilipT

  • Member
  • Posts: 821
Mollegabet bow questions
« on: September 19, 2016, 05:40:16 am »
I have a nice piece of european hornbeam which I intend to transform into mollegabet bow (lever bow). Since I never done that kind of bow before I have a few questions.

How minimal thick levers need to be so they don't bend?

How do you tiller the limbs? Do they have gradual taper from fades to the beginning of levers or they have constant thickness like in pyramid bows?

Thanks in advance  :)
Logged

Offline loon

  • Member
  • Posts: 1,307
Re: Mollegabet bow questions
« Reply #1 on: September 19, 2016, 07:50:20 am »
from what i've seen the levers are sometimes thicker than bending limbs, bending limbs are parallel, but not always
Logged

Offline Drewster

  • Member
  • Posts: 687
Re: Mollegabet bow questions
« Reply #2 on: September 19, 2016, 08:18:17 am »
Stalker, do a search for "Layout dimensions for Mollegabet bows" on here.  Half eye is the "resident expert" on these bows here on PA.  He will be glad to help you out too.  You can also Google information on these bows.  I'm just finishing up a black locust one.  Good luck and with yours.
Logged
Drew - Boone, NC

Offline bubby

  • Member
  • Posts: 11,054
Re: Mollegabet bow questions
« Reply #3 on: September 19, 2016, 08:28:39 am »
I like to do a pyramid taper from fade to top fade top of pyramid 1" wide top fade 1" long tapering to 3/4" then lever taper to 1/2" at tips. They only have to be 1/8" thicker to not bend at  finish
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline FilipT

  • Member
  • Posts: 821
Re: Mollegabet bow questions
« Reply #4 on: September 19, 2016, 09:27:27 am »
Just that little difference? Interesting
Logged
Pages: [1]
« previous next »