« previous next »
Pages: 1 ... 23 24 [25] 26 27 28

Author Topic: My board bow (build along?)  (Read 88690 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Re: My board bow (build along?)
« Reply #360 on: April 19, 2017, 11:11:16 am »
I've been looking at your picture and I think the fence lines behind the bottom limb are also messing with our eyes. Try to find a solid color background.
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #361 on: April 19, 2017, 11:17:58 am »
I'll keep shooting it in then. Don't worry, I will start on that osage stave after I finish this bow.  :-M
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: My board bow (build along?)
« Reply #362 on: April 19, 2017, 11:21:35 am »
Your goal will be to finish it in less than ten months ;D ;D ;D
Logged

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: My board bow (build along?)
« Reply #363 on: April 19, 2017, 12:05:46 pm »
Quote from: Marin on April 19, 2017, 11:17:58 am
I'll keep shooting it in then. Don't worry, I will start on that osage stave after I finish this bow.  :-M
That's great Marin. I think you learned a lot and gained some confidence on this one. Have fun shooting it. That's a pretty done good first board bow. I'm betting we'll see more from you.
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #364 on: April 19, 2017, 06:24:16 pm »
Wait, it's not finished yet. Still need to shoot it in, sand it down and wrap the handle.
Do any of you guys add a coat of clear sealent? Or linseed oil? Is it needed?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: My board bow (build along?)
« Reply #365 on: April 19, 2017, 06:37:48 pm »
You want to seal it with something. I use tung oil. Some use Tru-oil. Spray on poly. You want to keep the moisture away as much as you can.
Logged

Offline loon

  • Member
  • Posts: 1,307
Re: My board bow (build along?)
« Reply #366 on: April 19, 2017, 07:04:08 pm »
Linseed is enough if you don't expect it to touch water.. could try danish oil, shellac from button lac, too.
Or linseed to give it a nice color and pop the grain, then clear coat.
Don't really need to thin the linseed oil, but mineral spirits should work, dunno if with BLO.. to make it easier to apply.
I just rub pure uncut tung oil with my bare fingers, dunno if that's bad ...
Logged

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: My board bow (build along?)
« Reply #367 on: April 19, 2017, 07:48:37 pm »
This is what I do:
Sand the tool marks out.
Finish sand up to at least 220 grit.
Use 0000 fine steel wool
Wipe with dry cloth to remove sanding dust.
Wipe again, but this time using tack cloth. Will get sanding dust ya can't see.
Apply 3 coats boiled linseed oil or tung oil or teak oil or danish oil with light rubbing of 0000 steel wool in between each coat.
Apply 3 coats Rub On Poly with light rubbing of 0000 steel wool in between each coat.
Optional ... couple coats furniture wax.

While above does not yield the fantastic finishing results you will see here on PA, result suits me. YRMD.

Good luck!
« Last Edit: April 19, 2017, 10:56:32 pm by Knoll »
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline DC

  • Member
  • Posts: 10,396
Re: My board bow (build along?)
« Reply #368 on: April 19, 2017, 08:01:28 pm »
I have an old can of floor wax I use. How many of you are old enough to remember floor wax? ;D ;D ;D
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: My board bow (build along?)
« Reply #369 on: April 19, 2017, 11:31:33 pm »
Osage Outlaw has been using spray on rim sealer he got at a parts house like o'reilys or kragens
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #370 on: April 20, 2017, 11:04:50 pm »
Got up to 25" of draw today. Unfortunately no pics as it got too dark.
It seems to be shooting good but as I'm shooting in my backyard, I am only shooting down into a bush that catches the arrow.  I checked the weight at 25" and its 30# which  I hope is good.
Logged

Offline loon

  • Member
  • Posts: 1,307
Re: My board bow (build along?)
« Reply #371 on: April 20, 2017, 11:21:56 pm »
Nice! Close
Logged

Offline Marin

  • Member
  • Posts: 461
Re: My board bow (build along?)
« Reply #372 on: April 21, 2017, 10:09:55 pm »
Got to 28" today. Now it's a bow! The tiller looks good to me
I checked the weight and it's 38 # at 28" (my bathroom scale could be wrong) >:(
I'll have to be more careful with my next bow .
Now all I have to do is make this bow presentable
Logged

Offline bjrogg

  • Member
  • Posts: 11,016
  • Cedar Pond
Re: My board bow (build along?)
« Reply #373 on: April 21, 2017, 10:21:47 pm »
Good work Marin :BB :OK
Bjrogg
Logged
A hot cup of coffee and a beautiful sunrise

Offline penderbender

  • Member
  • Posts: 733
  • island life...
Re: My board bow (build along?)
« Reply #374 on: April 21, 2017, 10:53:21 pm »
That's looks pretty good man. Nice job on your first.  Looks way better than my first bow looked! Cheers- Brendan
Logged
Pages: 1 ... 23 24 [25] 26 27 28
« previous next »