« previous next »
Pages: [1] 2

Author Topic: Should I worry?  (Read 3631 times)

0 Members and 1 Guest are viewing this topic.

Offline RDSBandit

  • Member
  • Posts: 11
Should I worry?
« on: March 14, 2016, 07:14:56 pm »
So last weekend I chopped down a tree, not sure what it is. Elm, scrub oak maybe. I just don't know. Anyways, I chopped the tree down and cut it into one 6 foot log and one 5 foot log. I smeared Elmers glue on the ends. Well today I went out to my shop and saw there is mold growing on the ends of the logs! Is this a problem!? What should I do?!
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Should I worry?
« Reply #1 on: March 14, 2016, 07:32:03 pm »
Is your shop dry?, heated?
Logged

Offline RDSBandit

  • Member
  • Posts: 11
Re: Should I worry?
« Reply #2 on: March 14, 2016, 07:34:03 pm »
Dry yes. Heated no.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Should I worry?
« Reply #3 on: March 14, 2016, 08:00:28 pm »
I would wipe it off, wipe some bleach on it and when it's dry to the touch put some more Elmers on it. I'm suspecting that this time of year maybe the sap was running and the glue was kept too wet to set up. If you have the length you could cut an inch or so off the ends.
Logged

Offline RDSBandit

  • Member
  • Posts: 11
Re: Should I worry?
« Reply #4 on: March 14, 2016, 08:34:23 pm »
Okay cool. Thank you. I will try that!
Logged

Offline Hamish

  • Member
  • Posts: 1,557
Re: Should I worry?
« Reply #5 on: March 14, 2016, 09:37:41 pm »
If the bark is still on it will contribute to a mould loving environment. Split and rough into floor tillered staves. The good news is that this mould will likely only  cause cosmetic bluestain not structural rot.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Should I worry?
« Reply #6 on: March 14, 2016, 10:37:27 pm »
Split the logs in half and seal the ends again. There is moisture in the log and by splitting them you give the moisture somewhere to escape.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Lumberman

  • Member
  • Posts: 335
Re: Should I worry?
« Reply #7 on: March 14, 2016, 10:42:42 pm »
Mold is going to come from moisture being present, if you can maybe quarter or halve the log you will get below 35% mc a whole lot quicker. A fungal spray will cover you for a couple weeks and then I would only reapply if it was coming back. Hamish is right about the color stain; in my line of work the word stain is synonymous with mold
Logged

Offline RDSBandit

  • Member
  • Posts: 11
Re: Should I worry?
« Reply #8 on: March 15, 2016, 06:27:30 am »
I left all the bark still on. I have just held off splitting the logs because I was waiting to get a drawknife first. I can probably go ahead and spit them this morning.

But just to be clear, I split then or quarter them, then apply glue to only the ends? Not all the exposed wood, right?
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Should I worry?
« Reply #9 on: March 15, 2016, 06:45:28 am »
Yep that would be correct. :)
 Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Should I worry?
« Reply #10 on: March 15, 2016, 10:59:55 am »
That exposed wood is where the moisture escapes from. It's the ends and back(after removing the bark)that you don't want checking.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline RDSBandit

  • Member
  • Posts: 11
Re: Should I worry?
« Reply #11 on: March 15, 2016, 01:12:32 pm »
I went ahead and split the wood. I tried to quarter the bigger log but it started splitting way to narrow on one side so I stopped and just left it in 2 pieces.

The bark was peeling off easily so I took it all off. Now it is slick in the back where the bark was. Should I apply glue asap? And will that trap the moisture and I'll be in the same shape the ends are in? Or should I wait a day or two to let the backs dry out before I apply glue?

Also, maybe a stupid question, but, should I have them laying on their backs so the moisture will dry upwards towards the front of the wood? Or does it matter?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Should I worry?
« Reply #12 on: March 15, 2016, 01:17:02 pm »
Yes, seal the back, under where the bark was ASAP. It doesn't matter whether the log is on its back or not while drying.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline RDSBandit

  • Member
  • Posts: 11
Re: Should I worry?
« Reply #13 on: March 15, 2016, 01:37:30 pm »
Okay. The backs are all glued now.
Logged

Offline Lumberman

  • Member
  • Posts: 335
Re: Should I worry?
« Reply #14 on: March 15, 2016, 03:06:02 pm »
Got a picture of the log? I am sure they'll be able to tell you what it is pretty quick, cross your fingers for elm over scrub oak
Logged
Pages: [1] 2
« previous next »