« previous next »
Pages: [1]

Author Topic: Steam bending tempered wood?  (Read 1789 times)

0 Members and 2 Guests are viewing this topic.

Offline sieddy

  • Member
  • Posts: 708
  • Guaranga! :)
Steam bending tempered wood?
« on: February 15, 2016, 09:10:54 am »
Hi all i'm getting there with a new yew bow but I'm unhappy with the side profile of one of the tips. I steamed a bit of recurve into both tips then tempered the bends with a heat gun. One end has a much more pronounced bend then the other so I want to repeat the process on the straighter tip. Is it ok to try and steam and bend the wood given that its been toasted to a dark brown colour? Thanks  :)
Logged
"No man ever broke his bow but another man found a use for the string" Irish proverb

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Steam bending tempered wood?
« Reply #1 on: February 15, 2016, 09:16:26 am »
Sure, go for it. Use dry heat again if you want to.
« Last Edit: February 15, 2016, 09:53:29 am by PEARL DRUMS »
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline sieddy

  • Member
  • Posts: 708
  • Guaranga! :)
Re: Steam bending tempered wood?
« Reply #2 on: February 15, 2016, 09:50:06 am »
Cheers Chris  :)
Logged
"No man ever broke his bow but another man found a use for the string" Irish proverb

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Steam bending tempered wood?
« Reply #3 on: February 15, 2016, 09:58:10 am »
  Yeah, I would do as Pearl says.  Get it gently back in the form and go with dry heat.   Tempered wood is a little more vulnerable (less flexible) but small changes can still be made.
Logged
Pages: [1]
« previous next »