Author Topic: if you have trouble thinning abo  (Read 1651 times)

0 Members and 1 Guest are viewing this topic.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
if you have trouble thinning abo
« on: November 01, 2015, 11:24:21 am »
Once you have bifaced then comes reduction. Getting past 6:1 ratio is a real bear. For me it was a year of hitting  a glass ceiling. Take your time prepare everything. In the photo below you will see me thinning a very rough piece of  burlington with a terrible step to boot. Make sure your convexity is close and abraid up and down place break flakes on top and bottom then practice swing and go for it. You don't have to swing your hardest but don't be a pussy foot either.
« Last Edit: November 01, 2015, 02:41:35 pm by iowabow »
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: if you have trouble thinning abo
« Reply #1 on: November 01, 2015, 11:26:26 am »
Here are pictures of the nipped setup
« Last Edit: November 01, 2015, 11:32:06 am by iowabow »
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: if you have trouble thinning abo
« Reply #2 on: November 01, 2015, 11:56:38 am »
Well if ya have any questions just ask
(:::.) The ABO path is a new frontier to the past!

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: if you have trouble thinning abo
« Reply #3 on: November 01, 2015, 12:51:05 pm »
Nice job removing that step....

Looking forward to the next move... :D
There are no bad knappers, only bad flakes

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: if you have trouble thinning abo
« Reply #4 on: November 01, 2015, 01:27:59 pm »
Here is the finished point with bowmo style punched and iowabow ulna pressure flaked notches. He was with me on Facebook for the blow by blow.
« Last Edit: November 01, 2015, 01:42:04 pm by iowabow »
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: if you have trouble thinning abo
« Reply #5 on: November 01, 2015, 01:36:50 pm »
Here are two flakes first ulna and second punch bowmo style with feet and all
(:::.) The ABO path is a new frontier to the past!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: if you have trouble thinning abo
« Reply #6 on: November 01, 2015, 01:38:50 pm »
Look at the Fricking step I pushed out bowmo
« Last Edit: November 01, 2015, 02:45:32 pm by iowabow »
(:::.) The ABO path is a new frontier to the past!

Offline bowmo

  • Member
  • Posts: 1,035
Re: if you have trouble thinning abo
« Reply #7 on: November 01, 2015, 01:39:59 pm »
Punch flakes pay no mind to step fractures in their way  :laugh:

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: if you have trouble thinning abo
« Reply #8 on: November 02, 2015, 06:48:41 am »
Punch flakes pay no mind to step fractures in their way  :laugh:
Very powerful. I only needed to punch twice the ulna seemed to handle the rest well. Bowmo I am going to look again at my artifacts as you suggested. This is going to make stalled notches much easier to manage. The stalling happens mostly when I am trying to be careful lol.
(:::.) The ABO path is a new frontier to the past!