« previous next »
Pages: [1]

Author Topic: Cork handles  (Read 1545 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Cork handles
« on: September 12, 2015, 10:04:34 pm »
How do you finish cork handles? Oil would just soak in forever, wouldn't it?
Logged

Offline TimBo

  • Member
  • Posts: 1,047
Re: Cork handles
« Reply #1 on: September 12, 2015, 11:44:23 pm »
Tru Oil works.  Check out some fly rod building forums - they have a lot of good options for sealing cork. 
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Cork handles
« Reply #2 on: September 13, 2015, 06:19:47 pm »
Id just cover it in super glue.
Logged
Nothing ventured nothing gained

Offline steelslinger

  • Member
  • Posts: 242
Re: Cork handles
« Reply #3 on: September 14, 2015, 03:31:37 pm »
Iuse a slightly thinned tight bond 3 do a few coats then tru oil over that.
Logged

Offline Carson (CMB)

  • Member
  • Posts: 2,319
Re: Cork handles
« Reply #4 on: September 14, 2015, 10:09:45 pm »
I do as steel steelslinger, or do the same with shellac. I like to apply heavy coats of thin shellac between sanding the cork with progressively finer sandpapers. This fills the voids nicely.
Logged
"The bow is the old first lyre,
the mono chord, the initial rune of fine art
The humanities grew out from archery as a flower from a seed
No sooner did the soft, sweet note of the bow-string charm the ear of genius than music was born, and from music came poetry and painting and..." Maurice Thompso
Pages: [1]
« previous next »