Author Topic: second try at a R/D bow  (Read 5501 times)

0 Members and 1 Guest are viewing this topic.

Offline dylanholderman

  • Member
  • Posts: 787
Re: second try at a R/D bow
« Reply #15 on: November 12, 2015, 10:57:05 pm »
Here's a unbraced pic, I hope you can see it ok. It kind of blends into the background  :-\

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: second try at a R/D bow
« Reply #16 on: November 12, 2015, 11:23:15 pm »
I still think it needs a bit more bend on the right limb in the mid limb area. Maybe a bit on the left limb in the same spot. But not as much as the right limb. Hopefully this made sense.

Also, try to find yourself a way to make you a clean backdrop. Like a piece of plywood painted black or white. It will give you a better look at the tiller.
Patrick
« Last Edit: November 12, 2015, 11:26:24 pm by lebhuntfish »
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline dylanholderman

  • Member
  • Posts: 787
Re: second try at a R/D bow
« Reply #17 on: November 14, 2015, 12:06:39 am »
I think I'll stop here. Starting to get into a well tillered matchstick territory  :o ::)
But seriously this is only the second time that I have come in under weight, normally I have the opposite problem and have to bring it down :-\

Also I look about ready to pass out in this pic lol

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: second try at a R/D bow
« Reply #18 on: November 15, 2015, 05:07:00 pm »
Looks pretty good.
Patrick
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

riverrat

  • Guest
Re: second try at a R/D bow
« Reply #19 on: November 15, 2015, 07:06:31 pm »
right limb last third needs shaved a little. should correct tiller overall.i was looking at the pic on the other page
 Tony