« previous next »
Pages: [1]

Author Topic: Osage sapling question  (Read 2295 times)

0 Members and 2 Guests are viewing this topic.

Offline make-n-break

  • Member
  • Posts: 378
Osage sapling question
« on: July 23, 2015, 04:08:20 pm »
Would a 58" Osage sapling with a diameter of about an aerosol "OFF" bug-spray can hold up to say a bendy handle 55@22" ?? Straight limb design, no recurves.  It's split down the center and a ring is chased. Has pin knots but real nice rings. I'm pretty unfamiliar with Osage, especially this small of diameter. I'm roughing it out today and it will probably only make about 1.25 to 1.5" wide at the widest part of the limbs.
Logged
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Osage sapling question
« Reply #1 on: July 23, 2015, 04:49:04 pm »
I'd do it with locust O:)
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Spotted Dog

  • Member
  • Posts: 700
Re: Osage sapling question
« Reply #2 on: July 23, 2015, 04:54:14 pm »
Give it a shot. I made one 56" rectangle and tapered. 55@ 24".
Logged
A three strand cord is not easily broken. Ecc.4:12

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage sapling question
« Reply #3 on: July 23, 2015, 05:11:46 pm »
yes it will and more
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage sapling question
« Reply #4 on: July 23, 2015, 06:07:09 pm »
I love small diameter(2"+) osage "pole" bows. I've made 4 so far and they are some of my favorite style bows. My bows are about 64" to 66", bend through the handle and range from 45# to 55#@26"(tillered out to 28"). I did add rawhide backing because of pin knots but they also had sapwood on the back. Keep your bow as long as possible and you should be able to get 55#.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline make-n-break

  • Member
  • Posts: 378
Re: Osage sapling question
« Reply #5 on: July 23, 2015, 06:52:56 pm »
The stave is only 58" Pat but I figured I could make it up by using a shorter draw. Probably back it just for peace of mind.
Logged
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Osage sapling question
« Reply #6 on: July 23, 2015, 06:58:28 pm »
if you want to go to 24,, it will probably shoot a little harder with the longer power stroke,,, :)
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: Osage sapling question
« Reply #7 on: July 23, 2015, 07:57:30 pm »
A 57" ntn bendy osage made from a 2-4" osage sapling is my favorite bow to make for a 24" draw. I like 'em because of how quickly they can be reduced down to size with a hatchet and rasp and made ready for tillering.
 If the back of your stave is relatively clean, the ring is not violated, and it is well tillered a selfbow is very possible from a osage sapling. Sometimes those pin knots will beg for a backing though and sometimes they will be just fine. I'm still not completely sure how identify which pin knots will cause a problem from the ones that won't. ;)
Logged
I ain't broke but I'm badly bent.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage sapling question
« Reply #8 on: July 23, 2015, 08:00:01 pm »
Here are a few pics of the osage pole bow I built for the Trad Gang Bow Trade a few years ago...




...this is how I dealt with a handle for this bendy handle bow. It is laminated shoe leather saturated with super glue...


the finished bow braced...


...and unbraced...


Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline make-n-break

  • Member
  • Posts: 378
Re: Osage sapling question
« Reply #9 on: July 23, 2015, 10:14:45 pm »
BadlyBent, bradsmith, I was all for taking your advice and pushing it to 24" draw, but I actually just laid out the bow on the stave and its 54"!!  Oops. Might have to stick with 22" after all (?)

Pat, that bow looks great! After looking at yours I wish I would've left the sapwood on. Would have given me a little more wood to work with. I like the built up leather handle and I like the slightly flipped tips.  If mine turns out half as good I'll be very happy. Thanks again for the help everyone. I'll post pics if it survives.
Logged
"When making a bow from board staves you are freeing a thing of dignity from the humiliation of static servitude." -TBB1

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage sapling question
« Reply #10 on: July 23, 2015, 11:21:13 pm »
A slight flip of the tips will make better string angle, reducing stack and making less finger pinch at full draw.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

blackhawk

  • Guest
Re: Osage sapling question
« Reply #11 on: July 24, 2015, 07:54:29 am »
If ya know what your doing you can easily get a hunting weight at a 26" draw out of a 54" piece of osage...thats no problem for it
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Osage sapling question
« Reply #12 on: July 24, 2015, 10:05:11 am »
I think you have a good plan. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »