Author Topic: black locust bendy  (Read 6338 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
black locust bendy
« on: July 19, 2015, 06:10:33 pm »
I've had this piece of locust for a few years, and now that my stave press is built i decided to start on it, here's how it looked after reducing it to bow dimensions
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: black locust bendy
« Reply #1 on: July 19, 2015, 06:13:17 pm »
After several straightening sessions this is what i got

failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: black locust bendy
« Reply #2 on: July 19, 2015, 06:22:56 pm »
Here's the full draw it's 62"ttt an 1-3/8" wide more or less then tapers the last foot or so to 3/8" tips, rubbed it down with some dark walnut stain and rattle can finish there is some sketchy knottage in the top limb
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bushboy

  • Member
  • Posts: 2,256
Re: black locust bendy
« Reply #3 on: July 19, 2015, 06:37:42 pm »
Really impressive before and after pics,crazy what a bit of heat can do!excellent job as. Usual!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: black locust bendy
« Reply #4 on: July 19, 2015, 06:40:00 pm »
Wow really nice bendy....I'm going to work some black locust some day.
Again, well executed.
DBar
Integrity is doing the right thing when no one is looking

Offline bubby

  • Member
  • Posts: 11,054
Re: black locust bendy
« Reply #5 on: July 19, 2015, 07:07:31 pm »
Thanks bushboy
Thanks Dbar i appreciate it
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: black locust bendy
« Reply #6 on: July 19, 2015, 07:10:52 pm »
Nice looking black locust bubby.  I enjoyed the before and after pics too.  What was the draw weight on it?  I love a simple bendy handle hunting bow.  That one ought to get the job done.
Howard
Gautier, Mississippi

Offline Drewster

  • Member
  • Posts: 687
Re: black locust bendy
« Reply #7 on: July 19, 2015, 07:21:45 pm »
That's a fine looking bendy locust.  Congrats on coaxing a good one out of that stave.
Drew - Boone, NC

Offline Aaron H

  • Member
  • Posts: 3,437
Re: black locust bendy
« Reply #8 on: July 19, 2015, 07:45:20 pm »
Gotta love a clean, simple, bendy handle bow,  great job bubby

Offline bubby

  • Member
  • Posts: 11,054
Re: black locust bendy
« Reply #9 on: July 19, 2015, 08:14:13 pm »
Thanks drew, howard thanks it's 48#@28"
Falcon yeah nothing like a nice clean stave, seen one lately 😄
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline okie64

  • Member
  • Posts: 1,134
Re: black locust bendy
« Reply #10 on: July 19, 2015, 09:48:35 pm »
Nice looking bow Bubby! How did you like the locust?

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: black locust bendy
« Reply #11 on: July 19, 2015, 09:53:47 pm »
That finished out real nice Bub, looks like it was a tricky stave to work into a bow. When I get staves like that I usually put 'em in a box and ship 'em as far away as possible and look for something straighter to spend my time on. :)
I ain't broke but I'm badly bent.

Offline bubby

  • Member
  • Posts: 11,054
Re: black locust bendy
« Reply #12 on: July 19, 2015, 09:58:54 pm »
Thanks okie i like it just fine this is my second one and it's pretty close to osage, i did say close but it ain't quite osage
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: black locust bendy
« Reply #13 on: July 19, 2015, 10:01:27 pm »
Thaks for thinking of me when you were cutting firewood Greg,  :laugh: heck it wasn't too bad just a little heat here a little there ::)
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: black locust bendy
« Reply #14 on: July 19, 2015, 11:05:45 pm »
Nice job on that funky stave Bubby. 
I started out with nothin' and I still got most of it left