« previous next »
Pages: [1] 2

Author Topic: hello folks, what`s your opinion about that elm  (Read 2774 times)

0 Members and 1 Guest are viewing this topic.

Offline Hans H

  • Member
  • Posts: 420
hello folks, what`s your opinion about that elm
« on: July 04, 2015, 10:11:50 am »
I finished it already end of April but I was very busy in my job so I could`nt post it in time. It`s my first elm, straight and flat. The dark brown stripes came out by working down to the desired ring, it looks nice to me.
The handle is a bit bendy so I glued at belly side 2 leather stripes and wraped only a linen cord around, thought it is simple but effective
Total length is 62“, draw weight is 38# at 26“, tip overlays are buffalo, finished with 6 layers of danish oil.









Logged
Hans,      Bavaria, Germany

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: hello folks, what`s your opinion about that elm
« Reply #1 on: July 04, 2015, 10:41:34 am »
Very nice, Hans. The tiller looks good! I love a simple bow like this
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline rps3

  • Member
  • Posts: 1,514
Re: hello folks, what`s your opinion about that elm
« Reply #2 on: July 04, 2015, 10:46:44 am »
You did a mighty fine job on that.
Logged

Offline koan

  • Member
  • Posts: 2,393
  • Brian D. Mo.
Re: hello folks, what`s your opinion about that elm
« Reply #3 on: July 04, 2015, 11:08:39 am »
Very nice!..... Brian
Logged
When you complement a lady on her dress.....make sure she is the one wearing it.....

Offline sleek

  • Member
  • Posts: 6,764
Re: hello folks, what`s your opinion about that elm
« Reply #4 on: July 04, 2015, 11:15:49 am »
I like your workmanship. Well done. Your tiller does seem a touch off though. It wont bother the bow any just saying for future reference.  The upper limb looks great, lower limb looks a touch stiff out the fade and bending too much in the middle to outter.

To save you time, typically folks dont chase ri gs on elm. You just need to remove the bark. Was a ring damaged? Either way, again, you done good.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: hello folks, what`s your opinion about that elm
« Reply #5 on: July 04, 2015, 11:23:45 am »
Nice looking bow Hans, I like those brown streaks and the character they add to the look of the bow. Enjoy shooting that one, it looks smooth to me.
Logged
I ain't broke but I'm badly bent.

Offline Hans H

  • Member
  • Posts: 420
Re: hello folks, what`s your opinion about that elm
« Reply #6 on: July 04, 2015, 11:53:01 am »
thanks guys for your Kind words,
sleek: I`m thankful for every advice, many thanks
Logged
Hans,      Bavaria, Germany

Offline bushboy

  • Member
  • Posts: 2,256
Re: hello folks, what`s your opinion about that elm
« Reply #7 on: July 04, 2015, 12:18:32 pm »
Looks good to me,nice work!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: hello folks, what`s your opinion about that elm
« Reply #8 on: July 04, 2015, 12:56:06 pm »
Tiller looks good.  Looks like a sweet shooting bow to me.  Elm is hard to beat.  Did you heat treat the belly?  Elm on this side of the ocean seems to respond favorably to tempering the belly with heat.  I built one a few years back that finished off around 40lb draw weight.  After a slow toasting of the belly it picked up over ten pounds of draw weight. 
Logged
Howard
Gautier, Mississippi

Offline GB

  • Member
  • Posts: 519
Re: hello folks, what`s your opinion about that elm
« Reply #9 on: July 04, 2015, 04:25:12 pm »
That's a great looking bow.  Very nice work!
Logged
Yeah, I remember when we had a President who didn't wear a tinfoil hat.

Offline CodyPost

  • Member
  • Posts: 29
Re: hello folks, what`s your opinion about that elm
« Reply #10 on: July 04, 2015, 06:58:44 pm »
Looks great nice job looks like a bow you can enjoy shooting all day
Logged
In the beginning God gave man two ends, one to sit on and one to think with. Ever since that moment mans success has been dependent upon the one he used most.

Offline HighEagle

  • Member
  • Posts: 227
Re: hello folks, what`s your opinion about that elm
« Reply #11 on: July 04, 2015, 07:05:30 pm »
Man that bow is tight, really nice brace and FD pix.
Logged
Armstrong, BC

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: hello folks, what`s your opinion about that elm
« Reply #12 on: July 04, 2015, 07:30:23 pm »
Very nice! Congratulations! Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Hans H

  • Member
  • Posts: 420
Re: hello folks, what`s your opinion about that elm
« Reply #13 on: July 05, 2015, 01:29:12 am »
thanks again for all nice comments,
Howard: I only used dry heat for string alingment and to get some twist out
Logged
Hans,      Bavaria, Germany

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: hello folks, what`s your opinion about that elm
« Reply #14 on: July 05, 2015, 04:39:34 am »
Hi my friend,
nothing wrong with the tiller, it's just the wrong angle to take the pic. I've seen the bow in person and tiller is fine as also the whole thing and work. If I remember right it is the third or fourth bow from Hans - I think he has done a very good job.
And he's got a bad virus ....  :laugh: :laugh: :laugh:
Logged
Simon
Bavaria, Germany
Pages: [1] 2
« previous next »