« previous next »
Pages: [1]

Author Topic: super rose  (Read 1609 times)

0 Members and 1 Guest are viewing this topic.

Offline HighEagle

  • Member
  • Posts: 227
super rose
« on: April 23, 2015, 08:59:41 am »
Came across these giant roses the other day. Cut two at 6' x approx 1.25" - 1.75" sealed ends and striped stashed in the rafters. Anyone ever try making a bow from wild rose? Chuck
Logged
Armstrong, BC

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: super rose
« Reply #1 on: April 23, 2015, 09:42:00 am »
I've thought about it when I saw large rose stems but never tried.   I know rose shoots have a tendency to check while drying so be aware.  Maybe cutting out the belly side of the limbs below the pith and secure it to a form while drying might help...but that is just a guess.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: super rose
« Reply #2 on: April 23, 2015, 10:37:02 am »
See if you can leave the thorns on the back.  That would be bada$$
Logged

Offline joachimM

  • Member
  • Posts: 675
  • Good - better - broken
Re: super rose
« Reply #3 on: April 23, 2015, 02:24:29 pm »
I made a 34#@26" D-tillered bendy-handle straight self bow (51" ntn)  from a 22 mm thick (just under 1") rose branch last year
It checked badly but without twisting (I quick-dried it in a weak, that was asking for checking). By making the back opposite the crack it yielded just a basic decent "survival bow", after heat treating the belly over coals. Nothing exceptional, and took 1.5" set, mainly in one limb.
The crack is still visible in the center section, but doesn't seem to affect the bow's performance.

Joachim
« Last Edit: April 23, 2015, 03:53:31 pm by joachimM »
Logged
Pages: [1]
« previous next »