« previous next »
Pages: 1 [2] 3

Author Topic: Winged Elm  (Read 7556 times)

0 Members and 2 Guests are viewing this topic.

Offline alwayslookin

  • Member
  • Posts: 350
Re: Winged Elm
« Reply #15 on: February 03, 2015, 01:05:10 pm »
In for the show :D
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Winged Elm
« Reply #16 on: February 03, 2015, 01:15:10 pm »
Quote from: Parnell on February 03, 2015, 07:42:34 am
Think she'll run too narrow?  That's all I could pull with the stave...we'll see.  What do you think would be ideal for Elm at that length?

I know you didn't ask ME, but I work with elm a ton.  To me, that 1.25" would be pretty narrow if you factor in the wood and how long/big the recurves are.  Skinny bows with big recurves are often hard to get stable.  BUT, leave the length to avoid excessive set between the recurves and the handle, and to prevent breakage.

 You are right about the feel of the draw on those, though! LIKE BUTTAH!
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Winged Elm
« Reply #17 on: February 03, 2015, 01:16:19 pm »
Quote from: Pappy on February 03, 2015, 08:47:38 am
Very nice, I like winged elm a lot, it makes a very tough bow, just keep it dry, It is as bad or worse than Hickory in the taking on moisture aspect. :) that should make a beauty.
  Pappy

 That's interesting.  I haven't noticed this in other elms, but maybe that's due to where I live, too.
Logged

Offline Parnell

  • Member
  • Posts: 5,556
Re: Winged Elm
« Reply #18 on: February 03, 2015, 03:01:41 pm »
Where are you Springbuck?
Logged
1’—>1’

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Winged Elm
« Reply #19 on: February 03, 2015, 03:08:59 pm »
I thought it odd myself, but pappy lives in Humidsville, TN.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Winged Elm
« Reply #20 on: February 03, 2015, 05:43:58 pm »
  Utah.  Not too hard to dry wood here.
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Winged Elm
« Reply #21 on: February 03, 2015, 05:48:35 pm »
Lucky. Dry bows are happy bows.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Winged Elm
« Reply #22 on: February 03, 2015, 05:51:57 pm »
That's correct pd ;) happy happy dry dry
Logged
Is this bow making a sickness? or the cure...

Offline rps3

  • Member
  • Posts: 1,514
Re: Winged Elm
« Reply #23 on: February 03, 2015, 05:52:17 pm »
I would have bet good money that those hooks would have had to be steamed in. Shows what I know. When I start working more of my elm I look forward to it being so pliable. Will be watching.
Logged

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Winged Elm
« Reply #24 on: February 03, 2015, 09:02:25 pm »
Quote from: rps3 on February 03, 2015, 05:52:17 pm
I would have bet good money that those hooks would have had to be steamed in. Shows what I know. When I start working more of my elm I look forward to it being so pliable. Will be watching.

 Impressed me, too, but you can do a lot if you get it thin to start with, slowly heat it well, and crank into position at the same time.  I bent the heck out of some black locust once that was 3/8" thick.

  Yeah, we had a humid spring two years ago that lasted into June and it really threw me off.  I couldn't figure out why I suddenly was havinjg a whole different set of problems.
Logged

Offline russell

  • Member
  • Posts: 36
  • Northeast, MT
Re: Winged Elm
« Reply #25 on: February 04, 2015, 08:58:58 am »
Quote from: Parnell on February 02, 2015, 04:37:33 pm
Quote from: Woody Knot on February 02, 2015, 04:01:50 pm
Hi, did you use steam or some other heat source for assisting in the bending?
nice bend
Garry

Crisco and a heat gun for the heat.


Did you use Crisco all the way around and heat all the way around, or just the back of the bow while clamping it down?

Thanks, Mark
Logged
->>>--------->
   John 14:6

Offline Parnell

  • Member
  • Posts: 5,556
Re: Winged Elm
« Reply #26 on: February 04, 2015, 10:07:22 am »
SW Florida is a different beast from Utah in the humidity department'.  It'll be interesting to see how it does.
Russell, I do coat the whole limb in Crisco before I heat it.
My heat gun has a temperature dial and I set it medium and slowly work in the heat all around the limb so it penetrates.  Certainly, I don't concentrate the heat too much on the back of the bow but I do glance over it and the sides, but the belly gets the lion's share.  Make sure the limbs aren't too thick, as stated.  That was my biggest mistake when I was starting out.  Sand everything perfectly SMOOTH and go!

Did a little more scraping last night to get the blank closer to ground tiller now that the recurves have changed everything.

Here are some pictures.  Also, you can see how the whoop-dee-doo influenced the recurve, but it looks pretty good to me.

Check out my neon pink and chartreuse arrows with tamarack shafting.  Should match up well.
« Last Edit: February 04, 2015, 11:53:30 am by Parnell »
Logged
1’—>1’

Offline Onebowonder

  • Member
  • Posts: 1,495
Re: Winged Elm
« Reply #27 on: February 04, 2015, 10:41:30 am »
NICE!

OneBow
Logged

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Winged Elm
« Reply #28 on: February 04, 2015, 11:19:41 am »
Looking good Steve. :)
  Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Arrowind

  • Member
  • Posts: 1,428
Re: Winged Elm
« Reply #29 on: February 04, 2015, 09:39:14 pm »
Look'n good can't wait to see it finished.
Logged
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?
Pages: 1 [2] 3
« previous next »