« previous next »
Pages: [1]

Author Topic: Red oak self bow question...  (Read 2434 times)

0 Members and 1 Guest are viewing this topic.

Offline IndianKid

  • Member
  • Posts: 55
Red oak self bow question...
« on: December 30, 2014, 02:29:22 pm »
So #1 went boom, and we'll on my way through #2  :P

This is from locally harvested Red Oak and is 71" long
After handle, limb is 1.5" wide gradually tapering down to 1/2"

Question is what's a good thickness to rough to before tillering ?

Secondly, since it's wider near the handle will the limb wind up
a little thinner there ?


Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Red oak self bow question...
« Reply #1 on: December 30, 2014, 02:46:27 pm »
Remove material on the belly until the limbs bend at least a few inches, that is the thickness you need.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bubby

  • Member
  • Posts: 11,054
Re: Red oak self bow question...
« Reply #2 on: December 30, 2014, 03:18:34 pm »
Are you using a straight taper from fade to tip,  red oak does like to be a little wider 1 3/4"  to 2" with a stiff handle but with a na style d bow u can narrow it up some, listen to pearlie he gave good info
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline IndianKid

  • Member
  • Posts: 55
Re: Red oak self bow question...
« Reply #3 on: December 30, 2014, 04:26:33 pm »
Sounds like the best measurement I could
be given..

Yes, straight taper and
started out at 1 3/4 but
I goofed and drew line wrong :(

So now it's a little narrower than
originally planned but thought may be
a lil extra thickness might bring it back...

Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: Red oak self bow question...
« Reply #4 on: December 30, 2014, 04:38:09 pm »
Dump the red Oak use Maple. Or use White Oak.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline bubby

  • Member
  • Posts: 11,054
Re: Red oak self bow question...
« Reply #5 on: December 30, 2014, 05:20:49 pm »
Red oak will make a nice bow, i built a pyramid bow for my father in law from a ro board, 35-40# i dont remember which, and the bow took little set and was fast as hell, while its not the best choice, it will make a nice bow, probably more red oak bows get built than anything else as it's a common board and easy to get, in California there's oak everywhere
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Red oak self bow question...
« Reply #6 on: December 30, 2014, 10:16:50 pm »
yes red oak will make a great bow,, :)
Logged

Offline Comancheria

  • Member
  • Posts: 227
Re: Red oak self bow question...
« Reply #7 on: December 30, 2014, 10:49:18 pm »
Indiankid,

Going back to what Bubby said about being able to get away with a narrower build if you go with a full-width, working handle, on the bow that failed, how thick did you make the handle itself?  And where did it fail?  Thanks,

Russ
Logged
When sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane are outlawed, only outlaws will have sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane!

Offline Comancheria

  • Member
  • Posts: 227
Re: Red oak self bow question...
« Reply #8 on: December 30, 2014, 10:56:36 pm »
Indiankid,

Going back to what Bubby said about being able to get away with a narrower build if you go with a full-width, working handle, on the bow that failed, how thick did you make the handle itself?  And where did it fail?  Thanks,

Russ
Logged
When sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane are outlawed, only outlaws will have sinew-backed Live Oak flatbows with Agave-fiber strings shooting arrows made from river cane!

Offline Badger

  • Member
  • Posts: 8,124
Re: Red oak self bow question...
« Reply #9 on: December 30, 2014, 11:16:37 pm »
  If you go with a slight bend through the handle and 71" long 1 1/2 wide should be plenty for 50#.
Logged

Offline IndianKid

  • Member
  • Posts: 55
Re: Red oak self bow question...
« Reply #10 on: January 03, 2015, 01:04:54 am »
Russ, it failed mid limb (backed with rawhide) so not 100% sure if I had any tool marks.
What I think happened was there was a vein of sapwood here and there, though most was belly
side but see a small bit right under the back where it cracked... I ordered my x-ray glasses
and hope to never have that problem again lol..
Logged
Pages: [1]
« previous next »