Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Elm Tree Advice
« previous
next »
Print
Pages: [
1
]
Author
Topic: Elm Tree Advice (Read 1955 times)
0 Members and 2 Guests are viewing this topic.
BrokenArrow
Member
Posts: 168
Elm Tree Advice
«
on:
October 15, 2014, 12:12:38 pm »
I have cut what I believe to be an American Elm tree into four quarters and have removed bark down to sap wood.
This weekend I used a hatchet and draw knife to rough out 3 of them and I worked down the fourth even further.
The moisture level varies between 9% and 18% in the 3 staves with the fourth a bit lower on average. The tree when cut was around 35% moisture a couple months ago.
I know the staves will dry faster this way.
At what moisture level should I finish the bows?
Does Elm steam bend easily? How well does it heat bend?
I am leaving the sapwood as the backing. Is this advisable or do some go down to the hard wood as a backing?
Thanks
Logged
PatM
Member
Posts: 6,737
Re: Elm Tree Advice
«
Reply #1 on:
October 15, 2014, 12:19:58 pm »
Sounds more like Slippery Elm if you're noticing a lot of Heartwood.
Elm likes to be dry and it takes steam and heat very well.
Just leave the outer ring as the back. No need to remove anything.
Logged
JackCrafty
Global Moderator
Member
Posts: 5,628
Sorry Officer, I was just gathering "materials".
Re: Elm Tree Advice
«
Reply #2 on:
October 15, 2014, 01:11:05 pm »
I always keep the sapwood on elm. The kind we have in my area ( winged elm, I think) is very flexible and the resulting bows are way thicker than osage, for example. I like elm a lot.
Logged
Any critter tastes good with enough butter on it.
Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank
Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It? 200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr
PEARL DRUMS
Member
Posts: 14,079
}}}--CK-->
Re: Elm Tree Advice
«
Reply #3 on:
October 15, 2014, 02:09:40 pm »
I made my good friend an all heart wood elm long bow last winter. I backed it with rawhide for fear of the unknown. As far as I know its still alive and shoots quite well. It doesn't weight a pound total.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
sleek
Member
Posts: 6,764
Re: Elm Tree Advice
«
Reply #4 on:
October 16, 2014, 01:20:22 pm »
Any pics of the staves? Specifically the heartwood/sapwood?
Logged
Tread softly and carry a bent stick.
Dont seek your happiness through the approval of others
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Elm Tree Advice