Author Topic: Tiller check.  (Read 1946 times)

0 Members and 1 Guest are viewing this topic.

Offline BOWMAN53

  • Member
  • Posts: 2,238
Tiller check.
« on: March 20, 2014, 12:49:19 am »
I think the top outer is stiff. I did have a hinge in the bottom limb but I got rid of it, mostly.


Offline TacticalFate

  • Member
  • Posts: 234
Re: Tiller check.
« Reply #1 on: March 20, 2014, 01:50:52 am »
we need an unbraced profile to see the dips and bends in the stave, if there are any

Offline TRACY

  • Member
  • Posts: 4,523
Re: Tiller check.
« Reply #2 on: March 20, 2014, 07:25:38 am »
From the pic it looks flat in the upper half to the tip and maybe a little bit right out of the fade. Looking good !


Tracy
It is what it is - make the most of it!    PN500956

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Tiller check.
« Reply #3 on: March 20, 2014, 08:25:51 am »
Maybe a little on the bottom fad,looks pretty good to me,I leave the outer part of my limbs a little stiff anyway,some do some don't. :)
 Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tiller check.
« Reply #4 on: March 20, 2014, 09:41:43 am »
The tiller looks very good. I usually leave them stiff too. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline Josh B

  • Member
  • Posts: 3,741
Re: Tiller check.
« Reply #5 on: March 20, 2014, 10:37:02 am »
Hard to say without an unbraced pic and the front profile.  If you would be so kind as to put those up, I would be glad to try and help.  ;)  Josh

Offline BOWMAN53

  • Member
  • Posts: 2,238
Re: Tiller check.
« Reply #6 on: March 20, 2014, 10:59:27 am »
I'm seeing the stiff spots out of the fades now too. Thanks guys. Here's an unbraced pic. Back to the right. Parallel limbs till about 12" from the tips.