Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
Bows
»
Minimal moisture level for bamboo backing
« previous
next »
Print
Pages: [
1
]
Author
Topic: Minimal moisture level for bamboo backing (Read 2006 times)
0 Members and 1 Guest are viewing this topic.
Matthias Wiltschko
Member
Posts: 54
Austria
Minimal moisture level for bamboo backing
«
on:
February 11, 2014, 02:42:47 pm »
Hi guys!
I am planning on making a bamboo backed bow.
Question is, does bamboo like very low moisture levels around 5%?
The lower the moisture level the harder the belly.
Hickory works best at about 7% moisture.
Sinew and rawhide get critical under 3% as far as I can tell.
All the best
Matthias
Logged
Bowyers are not flexible, they are elastic!
www.bowbuildingschool.com
www.bowwood.at
4dog
Member
Posts: 1,610
Re: Minimal moisture level for bamboo backing
«
Reply #1 on:
February 11, 2014, 03:20:52 pm »
gonna watch this...i got a nice piece of bamboo...dry dry dry...been wondering when and if bamboo is "too dry to use" .
Logged
"SET" is always there !!!
PatM
Member
Posts: 6,737
Re: Minimal moisture level for bamboo backing
«
Reply #2 on:
February 11, 2014, 03:38:12 pm »
It will definitely be less prone to popping slivers if it is not as dry. Bamboo is very hygroscopic but that doesn't mean it can't get too dry if the RH is low.
Much safer to have it at a higher moisture content.
Logged
RBLusthaus
Member
Posts: 753
Re: Minimal moisture level for bamboo backing
«
Reply #3 on:
February 11, 2014, 06:38:38 pm »
Can't remember what he said, but I think Torges discussed this in his bamboo backed video. He keeps his boo in s hot box prior to use. I do the same, and the room had a dehumidifier running, but I never check moisture content of my boo. Russ
Logged
WhitefeatherFout
Member
Posts: 89
Re: Minimal moisture level for bamboo backing
«
Reply #4 on:
February 14, 2014, 02:16:06 am »
I like to run around 6% on boo before backing. I'm fairly certain it will gain some moisture from the wood if the wood is above that but I'm not sure and it may be a negligible amount and it would also depend on how well your specific glue transfers or inhibits moisture. On hickory, I like to match the mc at around 6% to the boo.
Logged
Eric Krewson
Member
Posts: 5,432
Re: Minimal moisture level for bamboo backing
«
Reply #5 on:
February 14, 2014, 10:06:20 am »
I like mine dry, dry to start with but like the wood you use for a core it will stabilize at what ever the M/C is in your area, here in Bama that is 12%. I keep my bows in the house so the M/C probably averages a little less than outside.
Logged
Badger
Member
Posts: 8,124
Re: Minimal moisture level for bamboo backing
«
Reply #6 on:
February 14, 2014, 11:43:46 am »
For a thin piece of bamboo backing the moisture level is not critical. Too dry could be a problem but anywhere in normal ranges should be fine. Cellulose fibers get stronger in tension when wet, once they go below about 6% they start weakening. I would say anywere between 6 and 12% would be fine. Where I live they seem to settle in about 8% which is fine.
Logged
Traxx
Member
Posts: 1,018
Re: Minimal moisture level for bamboo backing
«
Reply #7 on:
February 18, 2014, 01:28:09 am »
Funny you should mention this....
I was just talking with someone about this very thing tonight.We have noticed,that Bamboo backings and cane shafts have a serious tendency,to split and check in our very arid conditions in the Great basin.
Logged
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
Bows
»
Minimal moisture level for bamboo backing