« previous next »
Pages: 1 [2]

Author Topic: Bow Stringer  (Read 10657 times)

0 Members and 1 Guest are viewing this topic.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Bow Stringer
« Reply #15 on: February 02, 2014, 11:20:36 pm »
Excellent "How To" Rob.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Bow Stringer
« Reply #16 on: February 12, 2014, 10:09:05 pm »
Sasquatch sorry for taking so long to get the pic up.
Logged

Offline dingas

  • Member
  • Posts: 18
Re: Bow Stringer
« Reply #17 on: February 16, 2014, 10:36:33 pm »
What are the dimensions of the leather? Width of the strap and length of each side of the "T"? Did you make both ends the same or is on end bigger then the other? Sorry to pepper you with questions... I really like this and want to build one... and I am kind of a details guy :0)
Logged

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: Bow Stringer
« Reply #18 on: February 17, 2014, 07:56:54 am »
dingas the top of the T is 3 1/2 x 7/8 from the top of the T to the bottom is 4 1/2 x 7/8 there both the same you might have to play around with them for your bows this one fits some of my bows & some it don't. Hope this helps if you have anymore questions leave me know.
Logged

Offline dingas

  • Member
  • Posts: 18
Re: Bow Stringer
« Reply #19 on: February 17, 2014, 09:45:09 pm »
Thank you!
Logged

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Bow Stringer
« Reply #20 on: March 08, 2014, 01:56:28 pm »
Rob was kind enough to send me a copy of his pattern.  I have since made a few.  I find that for best use, you have to make sure the thickness of the top of the T should be kept to a minimum, else it interferes with string groove in use.  Overall - - excellent design and simplicity itself.  I plan to give one with each new bow so I never heave to hear excuses for not using one.     Thanks again Rob!!!!
Logged
Pages: 1 [2]
« previous next »