« previous next »
Pages: [1]

Author Topic: Osage growth rings  (Read 1962 times)

0 Members and 1 Guest are viewing this topic.

Offline Kennedy

  • Member
  • Posts: 19
  • Denham Springs, Louisiana
Osage growth rings
« on: January 26, 2014, 08:46:34 pm »
Does anyone have a picture of a good stave of Osage so I can compare the growth rings on it to the one I have? Ill post a pic tomorrow of mine and maybe get some help on which ring to chase
Logged

Offline wapiti1997

  • Member
  • Posts: 414
    • Joe Lacefield Wildlife and Nature Photography
Re: Osage growth rings
« Reply #1 on: January 26, 2014, 08:51:08 pm »
I am happy with this one... easy to chase, and not a bad ratio of early to late..
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: Osage growth rings
« Reply #2 on: January 26, 2014, 09:12:57 pm »
Just chase the ring until u get a nice single ring. Thickness doesn't matter to me. Thicker rings are easy to chase. As long as there is no damage or violations any ring should work
Logged
Nothing ventured nothing gained

Offline Joec123able

  • Member
  • Posts: 1,769
Re: Osage growth rings
« Reply #3 on: January 27, 2014, 12:23:14 am »
Growth ring thickness doesn't matter IMO
Logged
I like osage

Offline Zuma

  • Member
  • Posts: 4,324
Re: Osage growth rings
« Reply #4 on: January 27, 2014, 12:43:41 am »
New to bow making but I am guessing (chasing a ring) is to follow a growth ring the lenth plus, the length of the bow desired? How is that done? knife, draw bar?
Do you then chase a ring that gives you gross thickness?
I have access to mucho osage.
Thanks Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Kennedy

  • Member
  • Posts: 19
  • Denham Springs, Louisiana
Re: Osage growth rings
« Reply #5 on: January 27, 2014, 06:59:37 am »
I'm new to bow making as well Zumba. And Osage is a great wood. Chasing the ring means have the same growth ring down the entire back of the bow.
Logged

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Osage growth rings
« Reply #6 on: January 27, 2014, 07:06:08 am »
Looks like newer wood so seal as soon as you stop draw knifing that ring. If you stop to take a break seal it.  It can not wait till after dinner ...seal it. Seal that log!
Logged
(:::.) The ABO path is a new frontier to the past!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Osage growth rings
« Reply #7 on: January 27, 2014, 11:06:29 am »
Size of ring is relatively unimportant. Take a look at the rings on the smallest end. Take a photo and show us.
This is how I do it.
http://georgeandjoni.home.comcast.net/~georgeandjoni/osage.html
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Osage growth rings
« Reply #8 on: January 27, 2014, 05:35:41 pm »
I'm using this stave to build a bow for the TG Bow Trade. These are not the bet rings because of the difference in thickness from one side to the other but I will make a good bow from this 60" osage stave.


Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Kennedy

  • Member
  • Posts: 19
  • Denham Springs, Louisiana
Re: Osage growth rings
« Reply #9 on: January 27, 2014, 09:17:55 pm »
Thanks for the info!
Logged
Pages: [1]
« previous next »