Author Topic: Simple form for removing twist  (Read 1814 times)

0 Members and 1 Guest are viewing this topic.

Offline Newindian

  • Member
  • Posts: 734
Simple form for removing twist
« on: January 18, 2014, 04:13:35 pm »
This is something I made up this morning thought some of you might find it usefull, just two angled blocks( opposite directions) nailed to a board with enough room on one end to clamp down the bow. Adds some reflex when you use it to
I like free stuff.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Simple form for removing twist
« Reply #1 on: January 18, 2014, 04:16:26 pm »
I use small wood wedges wherever needed along the limb as I heat and clamp a bow to the reflex form.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline echatham

  • Member
  • Posts: 206
Re: Simple form for removing twist
« Reply #2 on: January 18, 2014, 05:06:02 pm »
nice. i do what Pat does, unless theres alot of twist and then i get creative with a crescent wrench and a bucket of water ;)