Author Topic: Bamboo  (Read 1406 times)

0 Members and 2 Guests are viewing this topic.

Offline elwinbm

  • Member
  • Posts: 7
Bamboo
« on: January 03, 2014, 08:28:46 pm »
Hi I me elwinbm back  here i stared in the 80s  I Had a new left shoulder replacement and I thew  making so know iawith archery
that was 2 years ago a i can pull a 35lb bow ,
So now i am learning how to make bamboo arrows .and a bow of bamboo that I am bring it down from 50 lbs
to 43 lbs witch i well  work to shot,
Ok how do you dye   bamboo  where do you get it
thanks
elwinbm

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Bamboo
« Reply #1 on: January 03, 2014, 09:17:41 pm »
Hi. I believe people use a product called rit-dye? I think it is a leather dye, or a fabric dye maybe. That is about all I know, hopefully others will come along with some advice.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline bubby

  • Member
  • Posts: 11,054
Re: Bamboo
« Reply #2 on: January 03, 2014, 09:53:18 pm »
You can get Rit in the powdered form or liquid form, I usually dilute it with rubbing alcohol if it needs it, works good but mixed with straight H2o it will raise a little grain, that's why I use the alcohol, it is cheap and you can get it anywhere
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline elwinbm

  • Member
  • Posts: 7
Re: Bamboo
« Reply #3 on: January 05, 2014, 09:13:00 pm »
Thanks
I got some leather die   let is dry for 24 hr.
Elwinbm

Offline dbb

  • Member
  • Posts: 745
Re: Bamboo
« Reply #4 on: January 06, 2014, 12:02:01 pm »
Dont forget to remove the rind first,you never get the dye to stay on if you dont.
It's better to ask and look like a fool than not to ask and remain one...